Search found 353 matches
- Sun Aug 23, 2015 1:20 am
- Forum: Performance Technical
- Topic: Laser CNC kicker cover shim **IDEA**
- Replies: 13
- Views: 9066
Re: Laser CNC kicker cover shim **IDEA**
The Kymco drive face doesn't have the lip or shoulder on the inside towards the belt. I have 7 af16 and sc10as in service on frames right now so it's hard to remember which has what and to articulate what was necessar, but it's too easy to do it as wheelman described and you can be worry free. Sanj...
- Fri Aug 21, 2015 9:15 pm
- Forum: Performance Technical
- Topic: Laser CNC kicker cover shim **IDEA**
- Replies: 13
- Views: 9066
Re: Laser CNC kicker cover shim **IDEA**
well that's a good start.1man8scoots wrote:I'm interested in 4 of them
thanks for the feedback
- Fri Aug 21, 2015 2:55 pm
- Forum: Performance Technical
- Topic: Laser CNC kicker cover shim **IDEA**
- Replies: 13
- Views: 9066
Laser CNC kicker cover shim **IDEA**
Gents, IÔÇÖm wondering if anyone would be interested in me getting some CNC kicker shims created for the use of the ZX trans setup. This would be used to properly shim out the kicker case 1mm out to run the ZX boss correctly. With not impacting or binding the kicker components. Just want to get a fe...
- Mon Aug 17, 2015 12:08 am
- Forum: Builder's workshop
- Topic: Favorite spray paint for inner plastic fender?
- Replies: 3
- Views: 4883
Re: Favorite spray paint for inner plastic fender?
Rustoleum Bumper Trim Paint
half way down the page i show how i preped things.
viewtopic.php?f=16&t=29845&start=30
half way down the page i show how i preped things.
viewtopic.php?f=16&t=29845&start=30
- Sun Aug 16, 2015 11:51 pm
- Forum: Technical Help
- Topic: Polini variator with boss issues
- Replies: 7
- Views: 5815
Re: Polini variator with boss issues
stock drive face, and variator is polini, and polini ramp...bonesv wrote:It may depend on which ramp plate you use.dem0nk1d wrote:If i opt out on using the Polini boss i would be losing some speed as well. Right? The belt will not travel to the top of the variator like it should.
- Sun Aug 16, 2015 10:35 pm
- Forum: Technical Help
- Topic: Polini variator with boss issues
- Replies: 7
- Views: 5815
Re: Polini variator with boss issues
If i opt out on using the Polini boss i would be losing some speed as well. Right? The belt will not travel to the top of the variator like it should.
- Sun Aug 16, 2015 8:59 pm
- Forum: Technical Help
- Topic: Polini variator with boss issues
- Replies: 7
- Views: 5815
Re: Polini variator with boss issues
i've been using the 5.6 grams. the other set i have are 6.9grams.
Roller Numbers
5.6 grams x 3 = 16.8 grams
5.6 grams x 6 = 33.6 grams
6.9 grams x 3 = 20.7 grams
6.9 grams x 6 = 41.4 grams
6.9 grams x 3 + 5.6 grams x 3 = 37.5 combo mixed
Roller Numbers
5.6 grams x 3 = 16.8 grams
5.6 grams x 6 = 33.6 grams
6.9 grams x 3 = 20.7 grams
6.9 grams x 6 = 41.4 grams
6.9 grams x 3 + 5.6 grams x 3 = 37.5 combo mixed
- Sun Aug 16, 2015 8:25 pm
- Forum: Technical Help
- Topic: upgraded gears in the AF16E motor
- Replies: 38
- Views: 17808
Re: upgraded gears in the AF16E motor
So here is how i stopped the gear from smashing on inside the case. I bought these from the local auto parts store "Oriley's" These washers are 23.95mm wide x 1.24mm thick http://i65.photobucket.com/albums/h216/dem0nk1d/Honda%20Elite%20SA50/IMG_20150816_131555_zpsitu7muyr.jpg http://i65.ph...
- Sun Aug 16, 2015 6:52 pm
- Forum: Performance Technical
- Topic: Gear installation problem
- Replies: 24
- Views: 11282
Re: Gear installation problem
can #6 be backwards?? I thought that and flipped it over but the teeth were still facing the same way no matter what so i didn't think it was possible. My cover is bolted on can someone check this please.. anything is possibly especially when things get frustrating and you have over thought about t...
- Sun Aug 16, 2015 6:47 pm
- Forum: Performance Technical
- Topic: Gear installation problem
- Replies: 24
- Views: 11282
Re: Gear installation problem
Gents, http://i751.photobucket.com/albums/xx159/trafficjamz2/diogears.jpg make sure that #6 isn't backwards. i know it sounds stupid but if you flip it upside/backwards everything will rotate just nicely without the cover, and as soon you tighten bolts it locks everything up. just give it a shot. Al...
- Sun Aug 16, 2015 6:26 pm
- Forum: Technical Help
- Topic: Polini variator with boss issues
- Replies: 7
- Views: 5815
Re: Polini variator with boss issues
thanks, for the info. i got the gears dialed in on the bike i will post an update later on my fix from my other post. I just ran around the block with the Stage 1 setup from Scooter Swap Shop. which is the 15x42 gear set, Polini Variator with boss, rollers, belt, springs... and i think that's it. I'...
- Sun Aug 16, 2015 5:20 pm
- Forum: Technical Help
- Topic: Polini variator with boss issues
- Replies: 7
- Views: 5815
Polini variator with boss issues
So reading over Wheelman's post that you must shim out the kicker case. I will investigate future into this later today. What are the cause and effects of using the stock boss vs the polini once the case is shimmed out? Also anyone have an ideal size of washer thickness that is being used? As discus...
- Sun Aug 16, 2015 2:45 pm
- Forum: Technical Help
- Topic: upgraded gears in the AF16E motor
- Replies: 38
- Views: 17808
- Sun Aug 16, 2015 11:12 am
- Forum: Technical Help
- Topic: upgraded gears in the AF16E motor
- Replies: 38
- Views: 17808
Re: upgraded gears in the AF16E motor
I had a set do this as well exact same spot, I put a shim on the axle that sat inside the seal right on the bearing and problem solved. It was the Tida straight cut gears, the gear is about 1mm thicker then stock and my other set of 8.44s that I have. What gears do you have there? Do you know the t...
- Sat Aug 15, 2015 11:34 pm
- Forum: Technical Help
- Topic: upgraded gears in the AF16E motor
- Replies: 38
- Views: 17808
Re: upgraded gears in the AF16E motor
i removed everything, only kept the secondary gear and axle in. everything still bound up, either which way i had the gear. i think something is up with the machining.