Honda Spree and Elite 50 Forums

Oh my gosh. That is amazing.

Alright, so after 4 different combos of weight going all the way down to 5g rollers, I realized I was going in thw wrong direction. The v8 pipe I have decided is a low-mid rpm power pipe that doesn't need a ton of rpm. 7g rollers are now in my vari and its a nice relaxing ride with a grip of torque ...

Ok so let's pick a time from the time it says on the boards clock, what time is durring the day for most everyone?

Since its more thab stock, the stock oil pump won't supply enough oil for a big bore.
I would continue to add that extra oil and I'm sure you will be fine if it was just a little soft seize. And the idle one is the top screw of the two adjustment screws.

Try the v8 yet?

Anyone with an opinion on reducing roller weights?

It doesn't seem as revy with the 6.5s as my last pipe.

So I got my exhaust on today, lookin great, and jetted up to a 110 main. Question, I have 6.5 grams in my vari and that worked great on my last pipe, I felt the rpm hit the sweet spot up high, but this exhaust with the 6.5s doesn't rev up as high and I think I can get more power out of it if I get m...

Yesterday limp gave me a deal on some parts, so I ordered a set of gears from him, sorry!

Thank you very much, I finaly understand gearing ratios on these haha.

haha haha, I just looked at that too, 900 for a "pretty straight" spree that has been pictured three feet off of the ground jumping over a horseshoe pit... Going over potholes was bad enough on my old sprees suspension, can't even imagine being that guys lower back for that landing. Great ...

Hey I'm ordering some gears and need to know tooth count. Thanks!

I swear the exhaust I sent you is from a completely stock elite sr. Should be an inner diameter of about 26mm and the v8 should be 28. Restricted should be a couple mm smaller inner diameter restricting exhaust flow. Possibly the owner before you had dremeled out the washer that resticts it. And def...

thank god someone is doing this.

A mod should cordon this section of the post and sticky it once he has results.

You have got me convinced. I'm gonna get my pipe and have fun doing wheelies for a bit, then trade up.

Hello everyone, update time. So I have a 30mm v8 pipe coming from trafficjamz(good seller) and am going to tune when it arrives. On my other v8 I was at a 105 drilled jet and it was deffinately rich. I made it that rich for break in, but I have about 300 miles on the bore now, so I might try that 10...