Honda Spree and Elite 50 Forums

I've got a couple of hobbit's, and built one up pretty good. I used a 70cc cylinder kit, bored the carb out to 12mm and rejetted, and put a puch jammi pipe on it welded to the original exhaust elbow. I also used the PA50II ramp plate so it does a nice 40mph. There is lots of info and tutorials on mo...

They've got that plastic leg shield on sale half price ($39)and also pretty much all the parts you'll need at dratv.com look under Honda C70 parts. Awesome little bikes, I've got a trail90 which is similar. nice smooth 45mph. You scored bigtime!

That is very similar to my CT-90. Since there is no motor in it, I would haul that home in a heartbeat and slap a Lifan 110cc honda clone in it. But that's just me...

How many volts coming out of the stator?

What is your resistance reading of the pulser coil?

Is your ignition coil a CDI coil and what are the resistance readings?

Double check all grounds! Not uncommon for the coil to get rusty/dirty where it grounds.

I have been doing a lot of research on CDI ignition lately, what I understand is that an engine using a pulse coil to trigger a CDI box (which is basically just a transistor (switch) and capacitor) are pretty much all the same, assuming it is a 2 cycle without a spark advance/retard (most are) or a ...

My SA50p only ran around 20mph as it was missing the airbox cover when I got it. I made a plate out of sheet metal to cover it for looks but it is basically just sucking air wide open through the filter. I had to drill the main jet to .81mm and now it runs 37mph after I removed the ramp plate and dr...

I second the cost vote, when I was a kid, Gar's Honda sold new Spree's for $398 out the door. They were very affordable and faster than most kid's mopeds at the time. I remember when my friends all got them they smoked me on my little PA50...I also remember they marketed the crap out of scooters in ...

Sorry Trafficjamz, I think I will keep the Elite. As of now it is a nicely running machine! I cleaned the carb, did a little rewiring and kicked it over 3 times and it started right up. Seems to run pretty good even though it has 5k miles. Thanks to Evilone, I now have most of the missing body piece...

Here is the link: http://www.aircooledtech.com/tools-on-t ... a_blaster/

I haven't made one yet but I already have the HF blowgun and some tubing, so it will be a quick try this weekend.

That case turned out awesome! I've never tried walnut shells, are they as messy as sand? I just read a tip on a VW site on how to make a soda blaster out of a HF blowgun and plastic tubing. I may try that on some aluminum and see how it works. If you are in kazoo, I may be able to pickup the plastic...

I live in Wayland, halfway between GR and Kazoo. I'll have to checkout the Thursday rides this spring in GR.

Too bad you guys aren't in West Michigan, I am looking for a group to ride with...I used to live in Detroit, when I was a kid used to ride my grandpa's solex up and down West Outer Drive. Never had a problem ('70's) but when I moved to Kentwood, I got jumped and had the solex stolen in the parking l...

Yep, sides and front.

I have some Aero 80 parts to trade if you or anyone else is interested.

He told me I was the 2nd but the first guy never got back with him. He had no clue what he had. motor turns over and is all there, should have it runnin' tonight.

Wanna sell the body pieces?

Sorry guys, it's gone. I picked that up for a mere $40...