Honda Spree and Elite 50 Forums

wouldn't matter if it was a toy car, remote controlled, battery operated.

martynkim wrote:
Totally unnecessary!! Everyone is trying to help in one way or another. Speak like an adult and be recognized.

yea totally unneccasary. whatever. oh EDIT.

to prove it, there's nothing you can do with that power. it's just gonna throw you off the back. oh there is something you can do with that power. there's a restricted version versoin of this scooter, called an s version or sa50p. elite s or sa50p. switch to it, and you'll have less power. you put a...

why don't everyone just about minus around 3 or somethig people, such as king kong guy, ktroy and someone else, i think. kiss my *. get some gears. i said it all along. this is all a copy. read 3 pages of crap. you guys can't let someone answer a question. and you can't tell noone how you've done st...

ok so took everything off checked the piston and rings and cylinder. they look ok. no new scratches looks like. when i got back the cylinder was pretty hot. i felt heat coming off it big time and you couldn't touch the spark plug for 2 seconds. well anyway so here are some pictures. http://img37.ima...

ok so i just got in my cylinder from limp off a stock elite with 300 miles on it. last night, i put it together. i lined up the gaskets, rings, cylinder, everything. put it on it, put it together. i was tightening down the head bolts, an di went in a cross shaped pattern. done it until every bolt wa...

what's the best way to put circlips in? i found out by looking. bear said get a pair of needle nose pliers and put a notch in them. i done that and was able to hold onto it. another question. the base gasket, it's not lining up around all the ports on the bottom of the cylinder. should i just cut it...

anyone know if you can port the exhaust port on a stock sa50 94+ elite motor? and does anyone know how much? i was just wanting to give it a little more power. i don't want to have to use other gas. and i was going to just smooth down the intake, transfer ports. not really open them up any. anyone k...

ok so i loosened both sides of the motor moutn, and without taking it out i wiggled it around. it seemed fine. and i tightened it up, but the motor is supposed to move around and be able to go up and down. i jacked the motor up and tightened the bolts down. maybe the back part im not sure doesn't mo...

you are a *.

not help, as in slave. i mean i would never calla slave help.

ok don't adjust with that needle. can be done. but don't twist the wire. maybe someone else has another way of adjusting, seems like we can use that person after all. didn't they have another way of adjusting it? that way of using that nut, you would have to take the whole throttle cable out and the...

doyou mean you jump around i nyour seat because, of the wheelies you almost pulling, then you hit your throttle, you just can't ride? adjusting some slack in your throttle will just make it jump later. you didn't say anything else. how is jumpiing on help being white? oh and edit: wished i'd found t...

mine must of been missing the adjuster. have you ever done it?
is their really one? and upgear. your topic got locked, because i helped. think i'll help more often.

shutup. i've never seen a honda scooter with the throttle cable not adjusted good. unless someone else has done it. you mean an 1/8 inch from when the throttle goes? usually, over time, the cable gets worn and you have to twist farther to get it to go. but yea, lean forward or something. these thing...