Honda Spree and Elite 50 Forums

Had some free time finally and I got the frame all painted up and assembled a roller!! all I gotta do is run the starter feed and get my turn signals headlight and throttle/controls and its good to go for now. also the front rim is temporary will not be my actual rim so the white on the tire is not ...

Been doing ALOT of work to the elite lately and figured I'd share the update. Still alot to do, paint the rim paint the frame wire everything build a tank repaint plastics mount bars permanently get a new shock build a new intake to move carb, but for 2 days worth of work its getting done :woot: htt...

Pegged the speedo today on my way to thunder by the bay (: finally up and running reliably, still a little rich, can probably pull another 5 mph from it with the right jetting. Pipe hits hard at 35 mph and just keeps pulling until it pegs the speedo + ~5-10mph gonna gps it tomorrow to see where its ...

I finally found my issue with my 1e40qmb swapped elite. I had a 4 stroke flywheel on it?!?!? I bought the engine "running when we pulled it" and never messed with the flywheel, while looking at a few other I had laying around I noticed the raised area for the pickup was really short compar...

I'm into both, but I can get 225 out of my 1.6l turbo engine on stock internals everyday for 1,000,000 miles and your 5.7l chevy will make 200hp on a good day without extensive mods cam swaps headers etc. and idle poorly then at 300,000 blowup for no real reason. I went through my muscle stage with ...

Installed my lights and new wheel/tire today the lights are all wired up and blinking as they should nicely tucked under the seat (:

jogs are great scoots you'll be pretty happy with it and the scoot looks to be all there . I'd go for it for $400.

It'd be kool to see some more modded no ruckus scoots out there go for it!!

Its the stock Carb from the 1e40qmb and the float is right at spec. Thanks for the info

I looked at the fiber glass reeds and they seemed really weak and flimsy /: probably order a set of cf ones soon. No cracks in the stockers though I had the reed cage out earlier today checkig them when I noticed how much fuel was shooting out. If I were actually using the amount of fuel being shot ...

I know SOME is normal, but theres a VERY large quantity coming from it you can see full size almost rain drop size drips shooting from the carb and dripping down my freshly painted frame and I STILL get a LEAN plug chop on both the NGK and autolite plug):< I have the stock metal reeds they only have...

I was running the ngk bp8hs and the local scooter shop told me the autolite is better hes been in business a while and they had a ton of scoots with bbk and stuff there so I trusted him /: runs the same I'll throw the ngk back in it I guess lol. still doesn't help with my issue either way, I'm not j...

So I used the SEARCH function and found a bunch of instances of peoples scoots spitting fuel at idle when a reed is bad. I've noticed my scoot does this but not at idle instead at high rpms and it does it REALLY BAD, the idea that my reeds are closing to slowly pops into my head, and I've been havin...

thanks, now if only it would run as good as it looks lol

I've noticed on my BBK I see knicks or scratches in the combustion chamber, I've never noticed this with a stock cyl I've even ran my stock head on this cyl/piston and haven't seen them, but with the head included in my kit I do. Theres NO scratches in the cyl or on the piston and it doesn't affect ...