Honda Spree and Elite 50 Forums

Definitely will make your motor run poorly x1 either buy or make a new one, don't think patching will work.. good find. i just patched it and put a layer of gasket sealer over it. it definitely seals now. the only problem is i need to adjust my carb because it is adjusted to when i had the leak. do...

vacuum leak would be a bad gasket or seal in the intake system. you can use a flammable spray or unlit propane torch, with the motor running you spray around the intake gaskets. crankcase area seals, if the engine revs up at any spot than that gasket, seal, etc. is allowing air into the fuel delive...

PimpinSpree wrote:Big bore kit, gears and a variator are the biggest speed makers. Should cost about 300. You could spend more on other stuff if you wanted to

What parts should i buy for the variator? I was looking at polini 7.7g weights but im not sure of exactly what parts to get for the variator system

And if i had a bad seal/vacuum leak would i fix it with just some gasket paper and rtv?

all i did was turn the smaller screw on the carb (not the idle or drain) in all the way which actually made it run a lot better, removed the restriction from the muffler and variator, and drilled out some of the baffles in the exhaust to make it flow a bit better You need to do a plug chop with a n...

An old adage... Speed costs money. How fast do you want to go?..... :coolcruise: it goes around 40 right now. i dont want an insane 120mph+ bike or anything of that caliber, but somewhere around 60 would be nice. i was thinking some new primary gears and a final drive at 9:1 or 7:1 on 72ccs.... i j...

Heres a pic of my bike. Its a 2000 Honda Elite S. Engine code AF16E. I was looking at some polini corsa kits, ruima ministroker kits and so on and so forth, but im looking at 800 dollars with that. I just recently got in to the scooter tuning scene and all i did was turn the smaller screw on the car...

Im in Macomb Twp... lol i would join just PM me or somethin

ok cool im running a BR6HSA plug in it right now. the bike is a 2000 Elite S with the AF16E motor. i know i prob messed stuff up with the muffler now that i look back on it, but in putting the polini corsa 72cc kit on in a short while with a new muffler so it cant do too much damage

Bear45-70 wrote:You do not want a hot plug, you want a cold plug or you will end up with a hole in you piston.

i really never got into spark plugs i just replace them with the stock ngk R's. what brand/model plug would u advise me to get?

maddog wrote:4 baffles? and you want me to make sure i know what i am talking about, im laughing so hard i can't drink my beer

i was told there was 4 baffles in the exhaust. i drilled through what felt like 4 metal plates. im new to scooter tuning so will you get off me? thanks.

I just recently started modding my bike with the removal of the variator restriction and drilling out of the 4 baffles in the exhaust :mrgreen: . i pulled the head off the engine and realized that i had a very weird piston wash. it is almost like a white/tan ashy look. i will solve that later. i jus...