Thanks for the Advice Eclark. I am not opposed to buying a new carb.
So if i understand correctly. If i buy this carb kit, I won't be able to use the oil injection because the new carb doesn't have inlet for the oil injection?
Search found 11 matches
- Thu Oct 12, 2017 12:30 pm
- Forum: Technical Help
- Topic: Spree Soft Seizing after 48mm BBK.
- Replies: 13
- Views: 7536
- Tue Oct 10, 2017 10:10 am
- Forum: Technical Help
- Topic: Spree Soft Seizing after 48mm BBK.
- Replies: 13
- Views: 7536
Re: Spree Soft Seizing after 48mm BBK.
Well thanks guys. I may just buy a stock piston and cyl for this bike. I was looking for a little more power and with decent reliability. This kit is being sold with a jet for the stock carb. From the way he sells it, he makes it sound like its pretty much plug and play with the stock carb. so if th...
- Mon Oct 09, 2017 12:58 pm
- Forum: Technical Help
- Topic: Spree Soft Seizing after 48mm BBK.
- Replies: 13
- Views: 7536
Spree Soft Seizing after 48mm BBK.
I am in the middle of the first tank (break-in period that Taz recommends). I added the 2 caps of oil to the tank. I am still using stock oil injection. The motor soft seized after 5 minutes of half throttle cruising. It did sit for about 3 years before i put the BBK in it. I am wondering if maybe t...
- Tue Aug 09, 2011 8:13 am
- Forum: Performance Technical
- Topic: Spree Vibrating after BBK install
- Replies: 24
- Views: 9335
Re: Spree Vibrating after BBK install
I installed the 44mm bbk and now the whole scooter vibrates much more than it did stock....Is this normal? Im assuming the 10g heavier piston and rings, has thrown off the crank balance. You are correct :thumbwink: The 48mm is shakes the fillings out of your teeth :surprise: Ok, I kinda figured tha...
- Mon Aug 08, 2011 8:10 am
- Forum: Performance Technical
- Topic: Spree Vibrating after BBK install
- Replies: 24
- Views: 9335
Spree Vibrating after BBK install
I installed the 44mm bbk and now the whole scooter vibrates much more than it did stock....Is this normal?
Im assuming the 10g heavier piston and rings, has thrown off the crank balance.
Im assuming the 10g heavier piston and rings, has thrown off the crank balance.
- Wed Aug 03, 2011 8:37 am
- Forum: General Discussion
- Topic: ****Official Picture Post...The Sequel****
- Replies: 431
- Views: 276820
- Tue Aug 02, 2011 3:12 pm
- Forum: Technical Help
- Topic: Ghetto Fab Hot Wiring. (lost key)
- Replies: 4
- Views: 2371
Re: Ghetto Fab Hot Wiring. (lost key)
Awesome! Thanks fellas!
- Tue Aug 02, 2011 2:50 pm
- Forum: Technical Help
- Topic: Ghetto Fab Hot Wiring. (lost key)
- Replies: 4
- Views: 2371
Re: Ghetto Fab Hot Wiring. (lost key)
Ok sorry, There are 4 wires that i have connected (2 seperate connections)
1. Red and black (turns the power on)
2. Green and black (I thought this was to the starter) is it actually whats causing the no spark?
1. Red and black (turns the power on)
2. Green and black (I thought this was to the starter) is it actually whats causing the no spark?
- Tue Aug 02, 2011 1:43 pm
- Forum: Technical Help
- Topic: Ghetto Fab Hot Wiring. (lost key)
- Replies: 4
- Views: 2371
Ghetto Fab Hot Wiring. (lost key)
Ok so i bought an elite from craigslist. The kid said he lost the key, So i took the ignition off and connected the wires together and now i can get the lights to turn on and the motor to turn over... but now it doesnt have spark (the kid said it ran, But im not sure). Is their something i have to d...
- Tue Jul 26, 2011 9:37 am
- Forum: Performance Technical
- Topic: Anything i should do before i install my 44BBK?
- Replies: 11
- Views: 4298
Re: Anything i should do before i install my 44BBK?
Perfect! Yeah i have been doing alot of reading on wikispreedia. And ive built plenty of two and 4 stroke small engines... Just checking to see if their was anything i should know in order to make it go smoothly.
Thanks for your help!
Thanks for your help!
- Mon Jul 25, 2011 2:49 pm
- Forum: Performance Technical
- Topic: Anything i should do before i install my 44BBK?
- Replies: 11
- Views: 4298
Anything i should do before i install my 44BBK?
I bought a really nice spree that needed a rebuild. I have a 44bbk on the way from Taz. I have a couple questions... I planned on switching to pre-mix, Ive read a couple threads and heard a couple different numbers for the Ratio... What ratio should i be using with this kit? What spark plug? Will I ...