Honda Spree and Elite 50 Forums

Thanks for the Advice Eclark. I am not opposed to buying a new carb.

So if i understand correctly. If i buy this carb kit, I won't be able to use the oil injection because the new carb doesn't have inlet for the oil injection?

Well thanks guys. I may just buy a stock piston and cyl for this bike. I was looking for a little more power and with decent reliability. This kit is being sold with a jet for the stock carb. From the way he sells it, he makes it sound like its pretty much plug and play with the stock carb. so if th...

I am in the middle of the first tank (break-in period that Taz recommends). I added the 2 caps of oil to the tank. I am still using stock oil injection. The motor soft seized after 5 minutes of half throttle cruising. It did sit for about 3 years before i put the BBK in it. I am wondering if maybe t...

I installed the 44mm bbk and now the whole scooter vibrates much more than it did stock....Is this normal? Im assuming the 10g heavier piston and rings, has thrown off the crank balance. You are correct :thumbwink: The 48mm is shakes the fillings out of your teeth :surprise: Ok, I kinda figured tha...

I installed the 44mm bbk and now the whole scooter vibrates much more than it did stock....Is this normal?

Im assuming the 10g heavier piston and rings, has thrown off the crank balance.

Our *...

Awesome! Thanks fellas!

Ok sorry, There are 4 wires that i have connected (2 seperate connections)

1. Red and black (turns the power on)

2. Green and black (I thought this was to the starter) is it actually whats causing the no spark?

Ok so i bought an elite from craigslist. The kid said he lost the key, So i took the ignition off and connected the wires together and now i can get the lights to turn on and the motor to turn over... but now it doesnt have spark (the kid said it ran, But im not sure). Is their something i have to d...

Perfect! Yeah i have been doing alot of reading on wikispreedia. And ive built plenty of two and 4 stroke small engines... Just checking to see if their was anything i should know in order to make it go smoothly.

Thanks for your help!

I bought a really nice spree that needed a rebuild. I have a 44bbk on the way from Taz. I have a couple questions... I planned on switching to pre-mix, Ive read a couple threads and heard a couple different numbers for the Ratio... What ratio should i be using with this kit? What spark plug? Will I ...