Honda Spree and Elite 50 Forums

Ok I've noticed a lot of smack talk or misinformation coming from one particular member. The bad hints or advice is the worst part because new members take it serious sometimes and thats sad! A lot of people complain about Bear but at least he is usually giving useful information (* he has called me...

And some pics of the build to date!

21mm carb with standard crank stroke!

Ok finally an update I have this little b**** of a project completed and am finally really happy with the results!! Got it tuned with a 45 pilot and a 118 main with needle clip in the middle! Runs like a bat out of *. Not sure of top speed as there is nowhere I can safely do a top speed run here but...

maddog wrote:The bear is an expert in slow scoots, 4 strokes should not be allowed on this forum

4strokes have reeds?!?, Wow news to me!

pressure tester built. can't seem to seal exhaust good enough to keep pressure. made metal plate with 2 holes and used exhaust gasket underneath to seal up sxhaust side. so far exhaust is the only area i see leaking. any tips for sealing exhaust? gonna buy big paper gasket tomorrow and try that... ...

Ok to update I'm now running a 50mm kit from Taiwan (can't remember the name), with 21mm carb 45pilot and 118 main, all leakdown tested and heat cycled more than 7 times,(lost count at 7) still having problems with temps! Have never been to WOT 100psi compression. Have not time to work on it this we...

I use it for all my posts! Please keep it.

Wheel man I needed a good laugh and that supplied it nice one!

Keep it coming, looks great!

I think it's the JDM of the European areox, not sure? They come in a 100cc two stroke and are still kind of pricey over here! But they look full of potential!

Over here the jog is a jog.

check for a air leak and make sure the compression is 125. use the kick lever and not the electric start to check that. also make sure your not using a long hose and a adapter for the compression tester. it adds volume to the head so compression readings will be lower How many psi do you think the ...

LoveMyHonda wrote:Nice engine, but I agree with them all. Do something about that plug or it will come off when you dont expect it and it will be devastating. Also bring your stock fan around with you as those fans like to explode.

That is the stock fan for the sym DD dont worry its tough as nails!

There was a thread about making a bracket for a oil plug and I followed it! But it cost a few yen!!!

3.00 10 42j

I think !