Honda Spree and Elite 50 Forums

under 100$ depending on the spec of the pipe and design..

i never knew this before..

thanks..really appreciate it...

btw polini parts for dio are so rare here in the philippines..

only the jog ang minarelli engines have them available here..

but for the dios so seldom...

hey guys wanna ask what jettings should i run on my dio stroker engine with 102cc

thanks..god bless!!

thats not where you read a plug for 2 strokes. that read is for 4 strokes. you need to use a new plug after the engine is warmed up and do a wot hold for 3-4sec then shut the engine off with the throttle wide open and come to a stop as quick as possible so that you dont foul the plug read. you then...

under jettings...u'll be lucky if ur piston don't melt...

but i'm guessing it does...

78 mj is too small especially when you have a 48mm bore..

all my stroker blocks are from taiwan..

i use sheng e and sgc..fortunately the rebore work was done correctly...

seizure can be the side effect of a bad rebore works...

*??? no worries :smile: as bear pointed out earlier, the taper, not the key hold ith flywheel in place. :thumbwink: is there an adjustable cdi for the dio? yup there is..actually u can set ur timing in retard or advance settings.. before i use japan daytona cdi...then run out of budget i use new ra...

the cdi is stock. is there a differnce between the spree cdi and the elite? I swapped my cdi to his for testing. there was no difference. cdi was not the problem. ur using a stock cdi for a high cc motor? what cdi are using?is it from dio originally? coz the oem cdi of dios have limiter on it... im...

i hope so too buddy...

i'll post vids of our test run once we have our custom pipe done..

that's the only hold up for now..

the front is now fitted with a 14 unlike before it has a bike tire on it...

there will be a drag competition next week and..

hopefully it will be running next week and will do a test run before the competition...

i'm about to have my custom pipe fitted this week fingers cross...

hey guys..its been a while...

i just wanna share u guys the mock up of my dio...

hope u like u like it...

tnx...

need ur help guys..

i have a 28 oko carb...

and i want o rejet it...

what jettings should i get?

i have a 120 up cc dio...

this set up will run on a 400m so i need a good set of jettings

thanks...