Search found 155 matches

by kauaianman
Mon Aug 03, 2015 8:07 pm
Forum: Performance Technical
Topic: fixed the problem
Replies: 11
Views: 6726

Re: Motor is cutting out. (switch out new block and got wors

try adjust floats. maybe not enough gas in carb and when you go to WOT all the gas gets sucked out and motor bog down, then when you go off throttle gas fills up again and throttle response comes back.
by kauaianman
Fri Jul 31, 2015 11:02 pm
Forum: Performance Technical
Topic: fixed the problem
Replies: 11
Views: 6726

Re: Motor is cutting out. (switch out new block and got wors

nah that should be fine. problem somewhere else.

temp gauge to see temps would be next step
by kauaianman
Fri Jul 31, 2015 9:50 pm
Forum: Performance Technical
Topic: fixed the problem
Replies: 11
Views: 6726

Re: Motor is cutting out. (switch out new block and got wors

where are you running the fuel pump pulse line to? need to tap under the reeds for pulse if running AF16 on honda dio with pulse fuel pump.

if you are running CT manifold and using tap above reeds the pump will stop pumping fuel because there is no case pulse above the reeds.

happy tuning :smile:
by kauaianman
Fri Jul 17, 2015 9:42 pm
Forum: Scooter Showcase
Topic: New Spree Build..AKA.."Little Evil"..125cc Hard Tail...
Replies: 94
Views: 60024

Re: New Spree Build..AKA.."Little Evil"..125cc Hard Tail...

1man8scoots wrote:That is a 120cc. Stroke (Radius squared times pie) =x
X divided by 1000= cc.
Radius squared is your bore divided by 2, then times it self.
27 X 27= 729
729 x 3.14= 2289.06
2289.06 x 120,404.556
120,404.556 ├À 1000= 120.4cc.
how 120,404.556 = 52.6 stroke?

thanks for info btw
by kauaianman
Sun Jul 12, 2015 3:23 pm
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

I have done over 100 stroked 2 strokes. It is not rocket science but it is a science. Math is part of science. This is a 74cc engine, child's play. If you want 31 degrees of blow down you need 189 ex and 127 transfer. could have been a typo mistake on the transfers i'll keep looking for the paper t...
by kauaianman
Sun Jul 12, 2015 2:37 pm
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

I'm interested to know how it's going also. According to my test timing engine and corsas on hand the timing you're looking for wouldn't be done with a simple 1mm base and 1mm up porting of the exhaust. The extra .8mm you added with the fiber gasket and longer stroke you would be over 190 on ex por...
by kauaianman
Sun Jul 12, 2015 2:33 pm
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

Get your wheel on the crank, wether it be stator or cvt side, spin the crank to just above the ex port. Loosen the lock nut for the wheel. Just as the edge, or bevel, of the piston reaches the opening of the ex port you will reset your wheel to zero or tdc or bdc it does not matter. Now that it's z...
by kauaianman
Sun Jul 12, 2015 3:16 am
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

I'm interested to know how it's going also. According to my test timing engine and corsas (what crank are you using for these test) on hand the timing you're looking for wouldn't be done with a simple 1mm base and 1mm up porting of the exhaust. The extra .8mm you added with the fiber gasket and lon...
by kauaianman
Thu Jul 09, 2015 1:37 am
Forum: Non-Honda Technical Help
Topic: 20,xxx miles on dd50 stock block crank good?
Replies: 6
Views: 5775

Re: 20,xxx miles on dd50 stock block crank good?

rental bikes easily see 20K.

zuma 125 just hit 28K still going strong
by kauaianman
Fri Jun 26, 2015 7:20 pm
Forum: Scooter Showcase
Topic: Picked Up A 2001 Elite Today!
Replies: 49
Views: 37415

Re: Picked Up A 2001 Elite Today!

need to pressurize to look for air leaks. i missed a lot of air leaks using the carb cleaner spray method before i made a pressure tester.

carb cleaner only good to find big air leaks
by kauaianman
Thu May 21, 2015 10:33 pm
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

CT black was next. great manifold but ugly casting inside from the factory http://i1068.photobucket.com/albums/u447/rustansouza/Kit%20bike%20build/0512151657_zpsy79obuhm.jpg http://i1068.photobucket.com/albums/u447/rustansouza/Kit%20bike%20build/0512151657a_zps7l7hpsb5.jpg http://i1068.photobucket.c...
by kauaianman
Thu May 21, 2015 9:53 pm
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

cleaned up cylinder. didn't need much just knife edge transfer openings, chamfer all ports inside cylinder, open exhaust port to accomplish desired 187* of exhaust timing with 1mm base gasket. http://i1068.photobucket.com/albums/u447/rustansouza/Kit%20bike%20build/0512151836_zpsdfp4iogs.jpg http://i...
by kauaianman
Thu May 21, 2015 9:42 pm
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

i usually degree everything before cutting a custom gasket to set port timings correct for the ministroke crank. http://i1068.photobucket.com/albums/u447/rustansouza/Kit%20bike%20build/0512151908a_zpszjtuupr0.jpg after i find the correct base gasket thickness to get the transfer ports to the correct...
by kauaianman
Thu May 21, 2015 9:31 pm
Forum: Scooter Showcase
Topic: Ministroke Taida 43.4 ministroke + Corsa fun
Replies: 25
Views: 17816

Re: Ministroke Taida 43.4 ministroke + Corsa fun

You should probably cut your gasket to match the block and the cylinder to the block, not just block matching to gasket, there's a huge air flow stop in the corners. Picture the air flowing. Minarelli corsas are worse matched. yup the SYM block is smaller the the AF16 so i match gasket to cylinder ...
by kauaianman
Thu May 21, 2015 5:29 am
Forum: Builder's workshop
Topic: yasuni c16 owners "top speeds"
Replies: 19
Views: 13304

Re: yasuni c16 owners "top speeds"

try to experiment with 28 carb. if you have 1 laying around that is.

and, i know....... i know........ BUT!

you never know unless U try ;)