Honda Spree and Elite 50 Forums

I use a 24mm x 1mm Here is a link for the exact one that I use: http://www.ebay.com/itm/USA-Made-Flywheel-Puller-24mm-x-1-0mm-Honda-QA-MR-CH-CR-RS-Kawasaki-Suzuki-50CC-/370647433355?pt=Motorcycles_Parts_Accessories&hash=item564c4f008b&vxp=mtr http://i.ebayimg.com/t/USA-Made-Flywheel-Puller-2...

I have an 84 Honda spree which seems to have committed suicide. The last few rides it started running strange and on the very last ride it went from making a strange noise every now and then to nothing but horrible noises. It never occurred to me until the top end was trashed to check the oil lines ...

kingkamehameha wrote:Fastplastic I think your outa the loop. The fish sticks joke comes from a south park episode where cartman makes ffun o kanye west saying he's a gayfish that likes fish sticks

BURN!

fastplastic wrote:u ask a question and make fun of ppl if they answer?

You obviously have no sense of humor...

What are you a * fish?

?

walks0nwater wrote:alright, i found the tube but how do i check if its bad

Bend it and check for cracking/dryrot.

That is a super tight scoot, jealous...

also im having a problem with the left crank casse cover coming off..it seems to be so stuck on both of my scooters its not even funny. i took off all 5 bolts. the right side came off just fine but the left is completely stuck like it was super glued and never meant to be removed again or something...

Slather some grease on the pinion gear teeth that mate up with the starter gear on the crankshaft, enough grease to fill between the teeth should be sufficient. The tube that bear was talking about is located on the rear of the engine coming out of the right side (tire side) of the transmission case...

Mine did the same thing when I got it, I opened the side case and it was covered in rubber dust from the belt. I think the lack of grease on my starter pinion and all the filth was the ultimate cause of the pinion not mating with the starter gear properly, thus making the CLANK! Also I drained the g...

Dont think that eyeballing a crank will suffice to check if its been damaged or not. Get someone with a crank truing fixture and have them check it for you. Theres plenty of people in MI that still know two-strokes. But at what cost? Ive seen "good" cranks on ebay for under a bill, if I c...

update... again... I did a ghetto runout of the crankshaft with a steel ruler that has very very small increments, and I think I dodged a bullet on this one, everything looks pretty darn strait. I did look at the parts fiche and I found a very interesting detail. The original 1985 spree crankshaft w...

Ok, update... I DID manage to get the crank out, however I managed to drop it on the concrete floot, I used a punch and a hammer not to damage the threads, however I dont think that matters anymore, it all looks alright, however there is small buff on the counter weight where it landed on the concre...

Ill tell you what, I * love Dubstep, I seriously listened to the same Deadmau5 cd for like a month on repeat at work, all night long, Im a kitchen manager/cook, it gives me a good beat to work to.