Honda Spree and Elite 50 Forums

both make the grinding noise. and ill get rid of the grease too.

Are all the years the same size brake cable. my froze up and i am looking for a working one. thanks

My spree is having trouble starting when i try to start it, it makes a grinding sound. when i try to kick start it at the bottom of the kick you feel it push back up and grind. I took off the cover and didnt see anything out of the ordinary. i greased everything up hoping that would solve the issue....

I did to grease the components and it didn't look like anything out of the ordinary

My 86 spree wont start now. I lent it to a friend to ride around while i was gone and when I got back it wont kick start or electric start. of course he has no idea why its not working. when i kick start it it gets stuck down, so i greased it up and still the same issue. when i trie to use the elect...

i took apart the carb and it is a little dirty but nothing bad. i cleaned everything and all the jets are cleaned and the float is works too. ill try to put it back on and see if there is any success if not. whats the next step.

Ok ill do a carb cleaning and inspection in a few days and come back with more information. what would i be looking for in the carb and it has been going on for awhile. ive been trying to tune the thing but the carb is in the worst spot to make adjustments while its running.

I have a 1999 Yamaha razz and it only drives if you hold the choke down. Once you throttle it, it dies out. Any help please

Can you point me in a direction where I could find the demensions. I know it's a teikei carb 18mm is there a model number I could look up thanks

It's a 99 razz sh50L

I'm having a hard time finding a higher pilot jet for the razz carb. They have none anywhere. Do you know where I could get one or any help thanks.

I do have an after market k and n on the carb. If I tried to restrict it with tape would that help? Or if I up jetting the starting jet would that do the trick

I have a Yamaha razz with a bbk and expansion chamber. It's having a hard time starting up. If I spray a little gas into it it'll start up right away and run just fine it's the starting part. I cleaned the carb. The carb is stock besides the main jet

When I try to kick start my spree it feels like it is slipping and does not catch the gear sometimes but gets it other times I kick it. It's almost like it disconnects and then will reattach the next kick. Some information on this would help a lot thanks guys.

Yeah I figured it out the o ring slipped and I had an air leak. Thanks guys you are always so quick and helpful in your responses.