Honda Spree and Elite 50 Forums

Hey guys, I have been so busy I have not put many miles on my little Aero 50 (setup: arreche 19, Malossi cast iron 65cc, Boyesen reed, LV SP3) Too many rides in the garage to choose from :geekdance: I have noticed that when it sits for more than a week or so, it takes a very long time to start. Like...

Thanks guys!

Yes it is, Pauly!
It is a blast to ride, I plan to build it into a mini-motard.

More where that came from...

Here ya go , Steve

Hey ya'll! I have been out of the loop for a while, new baby and starting a business and fixing my new dirtbike, now I'm back!
Check out my blog, lots of Honda stuff
http://hydeparkscooters.blogspot.com/

Got myself a new Arrow for the SR
Oh yeah, and a dirtbike, 2-stroke of course!!!

I got two for the price of one and now I rarely ride my Honda's. My carbed Minarelli 99 is a beast, Arrow pipe and Polini 70 cc kit 60mph plus! Front and rear disc and 13" wheels make a plush ride on the rough 3rd world streets in my Austin neighborhood. My 02 is a Ditech purchased not running ...

That oil ratio could be high for an otherwise stock motor, the plug could be loading up at low rpm. Try a hotter plug? If your idle screw has no effect there could be some mechanical damage on the slide or idle screw. Good luck

Anybody ever see anything like this?
Aero 125 , put up wet The shaft is still perfectly straight, I don't know how it is still in one piece!

I repaired a CH80 exhaust where the pipe had separated right where it enters the muffler body. I just cut a large access window into the mounting bracket so I could get the MIG tip in there and managed to weld the entire perimeter. Then I just welded the cut out piece back in. Still going strong 6 m...

Does anyone know of a source for replacement piston + ring sets for the venerable NH125? Are there any aftermarket pistons that will fit (with boring,of course)? Thanks ya''ll

72cc kit

So I just got my Malossi cast BBK for my AF16 Elite, I will be using the stock carb and exhaust for now. Who else is running this BBK on stock everything else and what jetting/airbox/extra head gaskets/ etc are ya'll using? The kit came with a #85 jet but I would like to get a few more jets for tuni...

There is a shop in Oregon I believe that rebuilds cranks. I inquired about having some scooter cranks rebuilt and they quoted me at $40 per crank with my supplied parts + shipping. Seems like a pretty good deal considering the rarity of a good AF05E crank check em out! RB-designs.com