Search found 512 matches

by curtis966
Mon Aug 24, 2015 9:57 am
Forum: Performance Technical
Topic: What exhaust gasket works best?
Replies: 6
Views: 5244

Re: What exhaust gasket works best?

The VW gasket is where it's at perfect fit and seal.
Image
by curtis966
Wed Aug 19, 2015 10:48 am
Forum: General Discussion
Topic: Attn all Oahu moped riders
Replies: 9
Views: 4856

Re: Attn all Oahu moped riders

Yeah that sucks. $15 bucks every 3 years here in Michigan, no insurance or anything, and 100cc or less. Cops really don't pay any attention to you as long as you aren't going over the posted speed limits.
by curtis966
Sun Aug 16, 2015 9:58 am
Forum: Technical Help
Topic: upgraded gears in the AF16E motor
Replies: 38
Views: 17422

Re: upgraded gears in the AF16E motor

I had a set do this as well exact same spot, I put a shim on the axle that sat inside the seal right on the bearing and problem solved. It was the Tida straight cut gears, the gear is about 1mm thicker then stock and my other set of 8.44s that I have. What gears do you have there?
by curtis966
Thu Aug 13, 2015 12:11 am
Forum: Builder's workshop
Topic: 01 Honda Elite- ZX headset swap, disk brake, DIO FUN
Replies: 125
Views: 67914

Re: Too many build threads- 01 Honda Elite

^ Shut Up Troll. Every post you make is stupid nonsense rambling we don't need that crap here.
by curtis966
Wed Aug 12, 2015 9:16 am
Forum: Builder's workshop
Topic: Summer Build: '96 SA50
Replies: 30
Views: 21613

Re: Summer Build: '96 SA50

9g rollers are to heavy even when mixed. And you always want to mix evenly when mixing rollers 3 and 3. Throw all 6s in and she will be hitting 8.5-9k and be a beast.
by curtis966
Sat Aug 01, 2015 6:00 pm
Forum: Technical Help
Topic: Any possibility of "bad" carb causing overheating?
Replies: 77
Views: 24432

Re: Any possibility of "bad" carb causing overheating?

Ok so how hot has it actually gotten and how long at WOT did it take to get there? How is the bike running in general?
by curtis966
Thu Jul 30, 2015 1:27 pm
Forum: General Discussion
Topic: Will Chinese disk brakes fit Elite?
Replies: 13
Views: 6714

Re: Will Chinese disk brakes fit Elite?

I also mated up a Chinese disc from end. Just modded my fork tube slightly and used the bearing race off of the Chinese scoot. Works perfect!
by curtis966
Thu Jul 30, 2015 10:13 am
Forum: General Discussion
Topic: Malossi Big Bore kit for a nb50 needed!!
Replies: 16
Views: 10982

Re: Malossi Big Bore kit for a nb50 needed!!

Yes go with the malossi, and you will be able to get jets from honda. Or just a lot so you have lots. I would just run it with the stock pipe and carb at first to brake it in then start looking into those. Graphite is gonna have some sweet pipes coming soon I think :) Hey Brandon can you get the mal...
by curtis966
Wed Jul 29, 2015 9:32 am
Forum: Scooter Showcase
Topic: TinyElvis Unsullied Scooter!
Replies: 55
Views: 33501

Re: TinyElvis Unsullied Scooter!

You have to use tubes on the stock rims.
by curtis966
Sun Jul 26, 2015 9:23 am
Forum: Builder's workshop
Topic: Wheel options for a 96' Elite SR?
Replies: 24
Views: 18308

Re: Wheel options for a 96' Elite SR?

Yeah that will rub under load for sure. If you take the rim off and put a thick washer on the axel then the rim you can get a little more clearance.
by curtis966
Sat Jul 25, 2015 8:43 pm
Forum: Scooter Showcase
Topic: New Spree Build..AKA.."Little Evil"..125cc Hard Tail...
Replies: 94
Views: 60011

Re: New Spree Build..AKA.."Little Evil"..125cc Hard Tail...

She sounds sweet man! And looks great too!
by curtis966
Fri Jul 24, 2015 7:26 pm
Forum: General Discussion
Topic: Engine number and titling issue
Replies: 6
Views: 6224

Re: Engine number and titling issue

Run up to Michigan they will register it for you.
by curtis966
Fri Jul 24, 2015 5:11 pm
Forum: Performance Technical
Topic: stage 6 manifold
Replies: 7
Views: 5579

Re: stage 6 manifold

My PHBL25 was really close with the malossi mani but clears by far with the ct black.
by curtis966
Fri Jul 24, 2015 9:56 am
Forum: Performance Technical
Topic: Need advice for my 84 Aero 50
Replies: 7
Views: 4960

Re: Need advice for my 84 Aero 50

Your only option would be to swap motors as they didn't make any bbks or any aftermarket parts for your motor. An af16 swap will be pretty much plug and play other then you may have to move the shock mount back a little bit and might have to do a little motor mount work. And if you've been reading y...
by curtis966
Thu Jul 23, 2015 11:15 pm
Forum: Scooter Showcase
Topic: New Spree Build..AKA.."Little Evil"..125cc Hard Tail...
Replies: 94
Views: 60011

Re: New Spree Build..AKA.."Little Evil"..125cc Hard Tail...

What front fender do you have there? Looking for one my self.