Search found 27 matches

by SpreeWilly
Tue Jun 02, 2015 11:22 pm
Forum: Technical Help
Topic: Spree Brakes are Sticking!
Replies: 3
Views: 3618

Spree Brakes are Sticking!

I have 2 sprees, '84 & '85. After they sit in my studio for the winter, their brakes get really sticky and my '84 brakes have basically seized. After playing with my '85 brakes, I managed to get them less sticky, but still not great. Despite my small collection, I haven't had to do brake work on...
by SpreeWilly
Mon Jun 03, 2013 10:43 pm
Forum: Technical Help
Topic: Any way to service the Spree Starter Motor?
Replies: 3
Views: 2060

Re: Any way to service the Spree Starter Motor?

That is the advice I was looking for. Thanks!
by SpreeWilly
Mon Jun 03, 2013 6:34 pm
Forum: Technical Help
Topic: Any way to service the Spree Starter Motor?
Replies: 3
Views: 2060

Any way to service the Spree Starter Motor?

Hello, I'm reassembling my Spree after it was brutally kidnapped and torn to shreds. I bought a used starter motor that seems to be in pretty good shape. Still, it is used. I'm wondering if there's a way to service my used starter motor to promote longevity (i.e. instructions to take it apart and re...
by SpreeWilly
Sun Sep 30, 2012 10:34 pm
Forum: Technical Help
Topic: Flooding Issues...
Replies: 6
Views: 3371

Re: Flooding Issues...

I bought the scooter about 3 months ago, so its possible I just didn't realize I was suppose to shut off this valve every time I got off the bike. However, it's a daily driver (I live in the city--it's ideal transportation) and it's never shown these symptoms until now. In the picture attached (hope...
by SpreeWilly
Sun Sep 30, 2012 8:42 pm
Forum: Technical Help
Topic: Flooding Issues...
Replies: 6
Views: 3371

Re: Flooding Issues...

This is good information; thanks. Would this confirm the faulty vacuum petcock idea?: Before removing the carburetor, I turned off the fuel line with the little on/off valve. I'm still new to two strokes, so I wanted to see what would happen if i turned it back on without the carb attached (i.e. wou...
by SpreeWilly
Sun Sep 30, 2012 8:14 pm
Forum: Technical Help
Topic: Flooding Issues...
Replies: 6
Views: 3371

Flooding Issues...

For the past few days, I've noticed my '84 spree having harder startups and smellier exhaust. Yesterday I drove my Spree 12 miles to work like I always do. After the ride, I parked it and let it sit for about 4 hours. When I came back to it, I smelled gas. Upon further inspection I saw gas seeping o...
by SpreeWilly
Wed Aug 15, 2012 1:13 am
Forum: Technical Help
Topic: Possible Bystarter?
Replies: 39
Views: 14145

Re: Possible Bystarter?

I have some input. I have cleaned my carburetor thoroughly with the help of a tech, chemically cleaned my muffler, replaced my air filter, replaced my sparkplug, adjusted my carburetor screws, replaced a few bolts, fixed a vacuum leak (the black tube between my airbox and carb was loose), inspected ...
by SpreeWilly
Sun Aug 12, 2012 4:04 pm
Forum: Technical Help
Topic: Chemically cleaning exhaust...
Replies: 3
Views: 2356

Chemically cleaning exhaust...

I've chemically cleaned my exhaust over the course of the last couple days. I rinsed it out really good with the hose; lots of nastiness came out. I've let it drain, and then shook it violently. Still, there's water inside. I can hear it swooshing a little bit. I got out my torch and got it warm (no...
by SpreeWilly
Tue Aug 07, 2012 4:28 pm
Forum: Technical Help
Topic: How to replace clutch...
Replies: 10
Views: 4649

Re: How to replace clutch...

I downloaded the service manual weeks ago, which I always check before I post. I also always search wiki before I post. However, I learn much quicker if I just post a question and get a more personable answer. I'd also like to remind everyone that these forums are not just for experienced Spree mech...
by SpreeWilly
Tue Aug 07, 2012 3:14 am
Forum: Technical Help
Topic: Possible Bystarter?
Replies: 39
Views: 14145

Re: Possible Bystarter?

My Spree hits 30, sometimes 31 or 32 on a completely flat surface--and it's all stock. The problem is acceleration bogs down after warming up. I understand a dirty carburetor would cause this, but I'm telling you I've thoroughly cleaned it. There's no more carbon deposits to be had. Still, I'll clea...
by SpreeWilly
Tue Aug 07, 2012 2:43 am
Forum: Technical Help
Topic: How to replace clutch...
Replies: 10
Views: 4649

Re: How to replace clutch...

Right this minute there's about 3372 miles.
Is the part number you gave me for the shoes? I haven't looked for them yet...
by SpreeWilly
Tue Aug 07, 2012 2:40 am
Forum: Technical Help
Topic: Carb Adjustment Help
Replies: 6
Views: 5821

Re: Carb Adjustment Help

A Followup:

I did exactly as I wrote above, and my Spree is running well! Thanks to all those who replied! :)
by SpreeWilly
Tue Aug 07, 2012 2:34 am
Forum: Technical Help
Topic: Possible Bystarter?
Replies: 39
Views: 14145

Re: Possible Bystarter?

I'm a lot like you--learning as I go, one Spree fix at a time, and relatively mechanically inexperienced, but I've just been through what you're doing. I hate to be pessimistic but I don't think you'll be able to increase your acceleration, and if you do, I'd like to know the remedy. My 84 Spree doe...
by SpreeWilly
Mon Aug 06, 2012 4:44 pm
Forum: General Discussion
Topic: 86 Honda Spree with rebuilt AF16
Replies: 13
Views: 6371

Re: 86 Honda Spree with rebuilt AF16

I don't know much about Spree buying/selling, but I am an antique dealer and I can offer you this: An item's true worth is constructed out of two factors: 1. What you're willing to let it go for. 2. What someone is willing to pay for it. Also, you must separate your sentimental value in order to sel...
by SpreeWilly
Mon Aug 06, 2012 3:49 pm
Forum: Technical Help
Topic: Back tire seized! What could it be?
Replies: 15
Views: 5112

Re: Back tire seized! What could it be?

Haha! Perfect! =D