Search found 27 matches
- Tue Jun 02, 2015 11:22 pm
- Forum: Technical Help
- Topic: Spree Brakes are Sticking!
- Replies: 3
- Views: 3702
Spree Brakes are Sticking!
I have 2 sprees, '84 & '85. After they sit in my studio for the winter, their brakes get really sticky and my '84 brakes have basically seized. After playing with my '85 brakes, I managed to get them less sticky, but still not great. Despite my small collection, I haven't had to do brake work on...
- Mon Jun 03, 2013 10:43 pm
- Forum: Technical Help
- Topic: Any way to service the Spree Starter Motor?
- Replies: 3
- Views: 2120
Re: Any way to service the Spree Starter Motor?
That is the advice I was looking for. Thanks!
- Mon Jun 03, 2013 6:34 pm
- Forum: Technical Help
- Topic: Any way to service the Spree Starter Motor?
- Replies: 3
- Views: 2120
Any way to service the Spree Starter Motor?
Hello, I'm reassembling my Spree after it was brutally kidnapped and torn to shreds. I bought a used starter motor that seems to be in pretty good shape. Still, it is used. I'm wondering if there's a way to service my used starter motor to promote longevity (i.e. instructions to take it apart and re...
- Sun Sep 30, 2012 10:34 pm
- Forum: Technical Help
- Topic: Flooding Issues...
- Replies: 6
- Views: 3485
Re: Flooding Issues...
I bought the scooter about 3 months ago, so its possible I just didn't realize I was suppose to shut off this valve every time I got off the bike. However, it's a daily driver (I live in the city--it's ideal transportation) and it's never shown these symptoms until now. In the picture attached (hope...
- Sun Sep 30, 2012 8:42 pm
- Forum: Technical Help
- Topic: Flooding Issues...
- Replies: 6
- Views: 3485
Re: Flooding Issues...
This is good information; thanks. Would this confirm the faulty vacuum petcock idea?: Before removing the carburetor, I turned off the fuel line with the little on/off valve. I'm still new to two strokes, so I wanted to see what would happen if i turned it back on without the carb attached (i.e. wou...
- Sun Sep 30, 2012 8:14 pm
- Forum: Technical Help
- Topic: Flooding Issues...
- Replies: 6
- Views: 3485
Flooding Issues...
For the past few days, I've noticed my '84 spree having harder startups and smellier exhaust. Yesterday I drove my Spree 12 miles to work like I always do. After the ride, I parked it and let it sit for about 4 hours. When I came back to it, I smelled gas. Upon further inspection I saw gas seeping o...
- Wed Aug 15, 2012 1:13 am
- Forum: Technical Help
- Topic: Possible Bystarter?
- Replies: 39
- Views: 14638
Re: Possible Bystarter?
I have some input. I have cleaned my carburetor thoroughly with the help of a tech, chemically cleaned my muffler, replaced my air filter, replaced my sparkplug, adjusted my carburetor screws, replaced a few bolts, fixed a vacuum leak (the black tube between my airbox and carb was loose), inspected ...
- Sun Aug 12, 2012 4:04 pm
- Forum: Technical Help
- Topic: Chemically cleaning exhaust...
- Replies: 3
- Views: 2425
Chemically cleaning exhaust...
I've chemically cleaned my exhaust over the course of the last couple days. I rinsed it out really good with the hose; lots of nastiness came out. I've let it drain, and then shook it violently. Still, there's water inside. I can hear it swooshing a little bit. I got out my torch and got it warm (no...
- Tue Aug 07, 2012 4:28 pm
- Forum: Technical Help
- Topic: How to replace clutch...
- Replies: 10
- Views: 4791
Re: How to replace clutch...
I downloaded the service manual weeks ago, which I always check before I post. I also always search wiki before I post. However, I learn much quicker if I just post a question and get a more personable answer. I'd also like to remind everyone that these forums are not just for experienced Spree mech...
- Tue Aug 07, 2012 3:14 am
- Forum: Technical Help
- Topic: Possible Bystarter?
- Replies: 39
- Views: 14638
Re: Possible Bystarter?
My Spree hits 30, sometimes 31 or 32 on a completely flat surface--and it's all stock. The problem is acceleration bogs down after warming up. I understand a dirty carburetor would cause this, but I'm telling you I've thoroughly cleaned it. There's no more carbon deposits to be had. Still, I'll clea...
- Tue Aug 07, 2012 2:43 am
- Forum: Technical Help
- Topic: How to replace clutch...
- Replies: 10
- Views: 4791
Re: How to replace clutch...
Right this minute there's about 3372 miles.
Is the part number you gave me for the shoes? I haven't looked for them yet...
Is the part number you gave me for the shoes? I haven't looked for them yet...
- Tue Aug 07, 2012 2:40 am
- Forum: Technical Help
- Topic: Carb Adjustment Help
- Replies: 6
- Views: 6018
Re: Carb Adjustment Help
A Followup:
I did exactly as I wrote above, and my Spree is running well! Thanks to all those who replied!
I did exactly as I wrote above, and my Spree is running well! Thanks to all those who replied!
- Tue Aug 07, 2012 2:34 am
- Forum: Technical Help
- Topic: Possible Bystarter?
- Replies: 39
- Views: 14638
Re: Possible Bystarter?
I'm a lot like you--learning as I go, one Spree fix at a time, and relatively mechanically inexperienced, but I've just been through what you're doing. I hate to be pessimistic but I don't think you'll be able to increase your acceleration, and if you do, I'd like to know the remedy. My 84 Spree doe...
- Mon Aug 06, 2012 4:44 pm
- Forum: General Discussion
- Topic: 86 Honda Spree with rebuilt AF16
- Replies: 13
- Views: 6974
Re: 86 Honda Spree with rebuilt AF16
I don't know much about Spree buying/selling, but I am an antique dealer and I can offer you this: An item's true worth is constructed out of two factors: 1. What you're willing to let it go for. 2. What someone is willing to pay for it. Also, you must separate your sentimental value in order to sel...
- Mon Aug 06, 2012 3:49 pm
- Forum: Technical Help
- Topic: Back tire seized! What could it be?
- Replies: 15
- Views: 5248
Re: Back tire seized! What could it be?
Haha! Perfect! =D