Search found 29 matches
- Mon Jan 07, 2013 9:41 am
- Forum: General Discussion
- Topic: Custom Wheels
- Replies: 22
- Views: 15893
Re: Custom Wheels
Bumping this - Not sure you are right, Trafficjamz - the bearings used, according to PowerSportsPlus, are 6200U - they have a 10mm inner diameter. I purchased the 6200-2RS bearings for my new front wheel, they are 10mm and are sealed unlike the stock bearings. Here is a good reference: http://www.pi...
- Thu Jan 03, 2013 9:59 am
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
Re: SA50p Progress
yes sir
- Thu Jan 03, 2013 9:17 am
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
Re: SA50p Progress
Just ordered a 78cc BBK via Patrick
- Thu Jan 03, 2013 8:37 am
- Forum: Scooter Showcase
- Topic: Scooterswapshop build and Fab page
- Replies: 14
- Views: 11627
- Thu Jan 03, 2013 8:04 am
- Forum: Performance Technical
- Topic: aftermarket carb for stock bore?
- Replies: 43
- Views: 16395
Re: aftermarket carb for stock bore?
Wo, didn't see all these posts -thought I had this thread subscribed to! I don't know if y'all saw my other post over in Technical Help, but I ran into problems with the pipe - probably too small of bore for it as king says. http://www.hondaspree.net/phpBB3/viewtopic.php?f=3&t=25730 The problem ...
- Mon Dec 31, 2012 11:17 am
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
Re: SA50p Progress
Yes this was after I let it run for 15mins. Temps were in the 160-180, hit 190max I think
- Sun Dec 30, 2012 8:56 pm
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
Re: SA50p Progress
http://www.youtube.com/watch?v=VSozof2lptg airbox cover off http://www.youtube.com/watch?v=fTEtlKgZKFQ airbox cover on, I think.. I am pretty lost as to what's going on, apart from it being cold (Which might explain most of it!) stock bore, stock carb, 88 main jet - probably need a 90 or maybe even ...
- Sun Dec 23, 2012 9:36 pm
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
Re: SA50p Progress
Since I've simply been working on it 1 day a week, I had about 32oz gas and 2oz oil..
- Sun Dec 23, 2012 8:55 pm
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
Re: SA50p Progress
Spoke to some others, since I had this silvery liquid come out of the exhaust at idle I'd imagine the smoke is part of some paint or whatever burning off in the new exhaust. nothing else can explain all this smoke...
as far as oil, using Repsol competition 2t oil
as far as oil, using Repsol competition 2t oil
- Sun Dec 23, 2012 8:37 pm
- Forum: Technical Help
- Topic: Help with the MB5! PLEEEEASE!
- Replies: 12
- Views: 6210
Re: Help with the MB5! PLEEEEASE!
How much do the MB5 go for, really? There's one I saw on CL for $1100 with ~4k miles
- Sun Dec 23, 2012 1:34 pm
- Forum: General Discussion
- Topic: ****Official Picture Post...The Sequel****
- Replies: 431
- Views: 288247
Re: ****Official Picture Post...The Sequel****
LOL sick. how fast it go?
- Sat Dec 22, 2012 5:18 pm
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
Re: SA50p Progress
Update on my progress: Replaced the cylinder head, got it running again. Put on a new MetraKit exhaust chamber pipe. Steve of VTCycles told me I'd probably need to put some holes in the airbox for proper jetting. He included a 95 and a 90 for the stock carb. I tried the 95, then the 90, then the 88....
- Mon Dec 17, 2012 4:20 pm
- Forum: Technical Help
- Topic: SA50p Progress
- Replies: 11
- Views: 5182
SA50p Progress
Hey guys, Got a little video, maybe y'all can hear the engine. This was before I made air/idle adjustments, but something is definitely off here - what does it sound like to y'all? http://www.youtube.com/watch?v=8T3cXB2mV1E http://www.youtube.com/watch?v=y1V0uGJUU0U I eventually got it working well,...
- Sat Dec 15, 2012 7:06 pm
- Forum: Technical Help
- Topic: "Hirochi-Shop" wheels
- Replies: 6
- Views: 3597
Re: "Hirochi-Shop" wheels
Doing a bit more research for those interested: It seems that the SK50m (Dio) shares the same part number for the brake pads as the 94+ SA50.. As long as the drum brake panel is the same fit, which it looks to be, I think this will work just fine. Hope web bike ships relatively quickly and I will kn...
- Sat Dec 15, 2012 6:40 pm
- Forum: Technical Help
- Topic: "Hirochi-Shop" wheels
- Replies: 6
- Views: 3597
Re: "Hirochi-Shop" wheels
According to a Russian site i just found "ðí 1988 ð│ð¥ð┤ð░ ð┐ð¥ 1992 ð▓Ðïð┐ÐâÐüð║ð░ð╗ð░ÐüÐî Honda Dio AF 18 ÔÇô ð▒ð░ðÀð¥ð▓ð░ÐÅ ð╝ð¥ð┤ðÁð╗Ðî Ðü ð┤ð▓ð©ð│ð░ÐéðÁð╗ðÁð╝ AF18E ð© ð▒ð░ÐÇð░ð▒ð░ð¢ð¢Ðïð╝ð© Ðéð¥ÐÇð╝ð¥ðÀð░ð╝ð©. ðƒð░ÐÇÐÇð░ð╗ðÁð╗Ðîð¢ð¥ Ðü AF 18 , Ðü 1990 ð┐ð¥ 1992 ð▓Ðïð┐ÐâÐüð║ð░ð╗ð░ÐüÐî Hond...