Honda Spree and Elite 50 Forums

more than 150 psi most shops run, I doubt it

nope its a duece 'stroker

i used to have a gold beater aero 125 86 or so dont remeber,
didnt register it

and i think if memory serves some of the dio tircks work on them 2. (variator/weights/springs)

you mean between the carb and this? Yup---you can see a brown plastic piece about 1/8" thick between that and the carb--there's an o-ring on either side of it. Spray some starter fluid around it, if your idle goes up, they're leaking and you need to replace the o-rings. If nothing happens, the...

oh and you might only be able to check one side at a time (cases split) cuz its really tight to try and measure/ see with the bottom bolted back together

bearing not pressed on all the way>?
check the clearence between the counter wieghts and the case on either
side, they shoud be the same and not very far from the side of the case

(.125 tops if memory serves)

p is fOR PIMP

HENCE SE50p = Special Edition 50 type Pimp

Yup i guess i did , my bad

http://www.lilypix.com/photos/data/5751ec3e9a4feab575962e78e006250d/2942_p44563.jpeg I have a bike sorta like this one (minus the "dubs"and pipe) only its way stock and black, need a 2 speed 4 it alas i got this bike w/ a 0 mi. motor grr and its a 1sp. double grr cant find stupid little p...

so that makes mine a NQ50R,


or is it now a NQ50K (kamelion paint)

some times idfk

ohwell

they also make ones with a , baffle if you will to deflect crap, i think used on the valve cover breather on a sprint car , that imo work ok.

i got an 88%

ok george (carlin)

http://www.youtube.com/watch?v=FHW_SdxO ... ed&search=

hey buddy, dont make fun of me. i am the person who started my mopeds with a screwdriver in the clutch. it works just fine. its really easy to start and once its running you just kick the screwdriver and go. Crap i was just gonna post that trick a freind of mine showed me Or a 8 penny nail work goo...

Just somthin i noticed on the prev pg. that didnt sound right to me

As the pic show, the starter relay gets its power from the IGN key and the BUTTON grounds the relay to make it work


coppied from the online manwell

joeweir1 wrote:The green wire is going to the connector with the green marking on it and black on black.That is correct is it not?thanks

Yes I believe it is