Honda Spree and Elite 50 Forums

so i put a zx driven face(kn planning) on and got a 669 18 30 bando belt, really glad i did because now the cvt works properly, i get full travel along the ruckus variator and have good power from 0 to 55. really good choice much better than shimming out the drive face/finding the correct sized boss...

Yea I was mostly just joking around. I filed one or two bolt holes on the v force reed block because I didn't want to cross thread the bolts into the manifold (I'm using the the ct chrome manifold) and as for fitting the manifold to the block I just chalked it up to the manifold being after market a...

all kidding aside i did need to drill out the holes on the manifold where it mounts to the block and also the holes on the reed block because i could only get 3 bolt holes lined up, its not very difficult but just saying

Here is a photo of my scoot after doing a bunch of engine upgrades, trying to keep a stock look

more photos

well its all done now, it runs ok still need to dial in the trans tuning i think. pulls really hard from around 10 mph up to 55, the ruckus variator seems to be pulling the belt up on the drive face without additional spacers between the drive face and variator boss. here are some photos of the port...

well life got a little bit in the way, but im slowly working on the scooter still. i learned a lot and got a couple cool tools out of the experience though 8) as of right now i ported the intake and the boost port to match the gasket, i also popped open the trans and got the final gear pressed onto ...

I'm going to keep the 28mm for now and if I feel it's lacking in throttle response or power I'll take it off and save it for another build since I already have the jets and all. Can't wait to get off of work and see what I can get done tonight. Hopefully I'll have an update for the thread.

I already picked up jets. I'm kind of skeptical of the 28mm carb with this build and if I don't like it I'll be buying one of the 24mm carbs you just got in plus some jets to go with it

these are a few pics of what ive done thus far

Hello all i finally got all of my parts from the fine members of the hondaspree dot net community and decided to start on my first scooter build of all time, I hope everyone enjoys and maybe a few people who are planning a similar build could get a thing or two out of my thread. I have (what I think...

finally took a photo of the tail light i picked up from jeff

ill have tons more photos(possibly a thread) once i get the big scooterswapshop order in this week

i actually just took a photo of dinner for something unrelated, lol

get jealous boys!!

http://i.imgur.com/hTXtucx.jpg

Sent you a PM

Hello all, this is my new elite waiting on plates and parts for it I'll be posting more photos and things about it as parts come in and get installed