Search found 1339 matches

by MrJumps
Wed Nov 30, 2022 10:39 pm
Forum: Builder's workshop
Topic: Ch80 restromod project
Replies: 9
Views: 5528

Re: Ch80 restromod project

https://i.imgur.com/GO3PYTs.jpg It was pretty easy to get the motor in, flipped a ch80 mount, and shopped the limits off the ch250 mount. My donor was an elite 250. https://i.imgur.com/eqdQTxQ.jpg https://i.imgur.com/AE65Ytb.jpg I picked up this 2008 cf moto for 180 bucks, it think it might run wit...
by MrJumps
Sun Aug 15, 2021 2:14 am
Forum: Technical Help
Topic: plugged carb float bowl
Replies: 10
Views: 3829

Re: plugged carb float bowl

Buy a replacement carb off amazon Type "nq50 spree carburator" Pick the cheapest and fastest shipped one, bolt it up, mount the airbox to it and make sure the filter is good, if not there's a few venders here who sell filters. When you say you drilled out anything on a carb, you really did...
by MrJumps
Thu Aug 12, 2021 2:48 am
Forum: Performance Technical
Topic: Malossi crank part# help
Replies: 7
Views: 4157

Re: Malossi crank part# help

I had a small end, its worth swapping to the big end, better part selection.
by MrJumps
Tue Aug 10, 2021 9:14 am
Forum: General Discussion
Topic: INSIDE Carburetors
Replies: 8
Views: 4094

Re: INSIDE Carburetors

ped wrote: Sun Aug 08, 2021 6:37 pm Great video. But miss my friends. Mr. wheelman. Mr. jumps. Mr. Meatball. Everyone else. And the myth, The legend, Mr. Mousewheels.
Im on facebook often doing scooter and motocyfle stuff, sling me a pm.
by MrJumps
Tue Aug 10, 2021 9:12 am
Forum: Technical Help
Topic: Dio Af18e small wrist pin what do u think?
Replies: 3
Views: 1867

Re: Dio Af18e small wrist pin what do u think?

Get a 12mm crank, if your going bbk it will really let you rev to the moon.
by MrJumps
Sun Aug 08, 2021 10:03 am
Forum: General Discussion
Topic: NH125 Aero roller guides
Replies: 11
Views: 4340

Re: NH125 Aero roller guides

So I would replace the variator and clutch assembly. I hate to send you on that quest but that pitting is gonna tear up belts. Scooter swap shop has performance aftermarket options or ebay will be your best bet. Make a wtb post in the for sale thread. But I personal would not reuse that pully setup ...
by MrJumps
Wed Aug 04, 2021 11:33 am
Forum: General Discussion
Topic: Honda spree petcock cover.
Replies: 9
Views: 3896

Re: Honda spree petcock cover.

Theres a guy on facebook in a group called "lovers of honda spree" make a post in there and someone will tag him. If not someone will 3d print you one. If not then someone will have a oem used one. Lots of members in that group.
by MrJumps
Mon Aug 02, 2021 1:12 pm
Forum: Technical Help
Topic: 86 Spree not turning over
Replies: 10
Views: 2719

Re: 86 Spree not turning over

If your oil res is dry, try to trunt he motor over by kicking it, if it doesn't budge, pull the cvt cover. If the belt is snapped it could be wrapped up in everything. But I have a feeling since your oil is dry it may be seized up... wish you luck my friend.
by MrJumps
Sat Jul 31, 2021 10:22 am
Forum: Builder's workshop
Topic: Ch80 restromod project
Replies: 9
Views: 5528

Re: Ch80 restromod project

Well non photo update but I kinda wanted to test the waters and get an opinion or two. I acquired the ch250 along with a harness and the entire front forks off an elite, the bigger wheel, brakes, etc. Do I cut and weld the larger elite stem into place or do I try to modify elite 50 forks to fit and ...
by MrJumps
Sun Jul 25, 2021 2:33 am
Forum: General Discussion
Topic: INSIDE Carburetors
Replies: 8
Views: 4094

Re: INSIDE Carburetors

Howdy meatball how do!



I thought itbs and carbies where the same thing but apprently carbies refers to carbs that are synced to each other. Itbs are just throttle bodies... I ordered some cbr 1000 throttle bodies for the miata.
by MrJumps
Sat Jul 24, 2021 12:01 am
Forum: General Discussion
Topic: INSIDE Carburetors
Replies: 8
Views: 4094

Re: INSIDE Carburetors

Check this out

Not carburetors but itbs
by MrJumps
Thu Jul 22, 2021 7:38 pm
Forum: Builder's workshop
Topic: Ch80 restromod project
Replies: 9
Views: 5528

Re: Ch80 restromod project

Well bad news, the kid who owned this before and I talked and he mentioned that he accidently removed a spring from the bottom of the motor. I did the valve lash today and its still at tdc but it has ridden about 100 miles probably without an oil pump or tensioner on correctly. It is in time but mak...
by MrJumps
Tue Jul 20, 2021 2:39 am
Forum: Builder's workshop
Topic: Ch80 restromod project
Replies: 9
Views: 5528

Re: Ch80 restromod project

Wish i had more encouragement to give, but they are much like the Spree pertaining to making it go faster....motor... :urban: Geeze I figured, I've been spending a few hours reading up on the forum. I tried to browse noiseguys ebay store for a air filter but it doesn't seem like he has one. Maybe I...
by MrJumps
Tue Jul 20, 2021 12:55 am
Forum: Builder's workshop
Topic: Ch80 restromod project
Replies: 9
Views: 5528

Re: Ch80 restromod project

Image
by MrJumps
Tue Jul 20, 2021 12:51 am
Forum: Builder's workshop
Topic: Ch80 restromod project
Replies: 9
Views: 5528

Ch80 restromod project

Soooo ita been a minute since ive wrenched on a motocycle so I brought a ch80 that kinda fell into my lap. 1400 original miles, original everything including the tires. Og must have drained all the fluids except the oil, its gas tank is minty. The oil was oem break in oil. Some young dumb kid brough...