Search found 46 matches

by DavidB
Tue Jun 21, 2022 11:13 pm
Forum: Technical Help
Topic: Honda Flush Body Panels
Replies: 10
Views: 2966

Re: Honda Flush Body Panels

I have a question: How wide is the floorboard and front portion below the handle bars on the stateside Sprees? Mine is 13 inches as I compare to a stock photo, width unknown. Thanks.
by DavidB
Tue Feb 22, 2022 3:47 pm
Forum: Technical Help
Topic: Honda Flush Body Panels
Replies: 10
Views: 2966

Re: Honda Flush Body Panels

It looks like only 12" width to work with to extend the floor board and build the front panel.
by DavidB
Sat Feb 12, 2022 10:18 pm
Forum: Technical Help
Topic: 1986 honda Elite 150d Fuel sending unit
Replies: 18
Views: 10452

Re: 1986 honda Elite 150d Fuel sending unit

The silver epoxy worked in repairing some of the traces. Some copper lifted but I put it back down with the epoxy.
by DavidB
Sat Feb 12, 2022 10:09 pm
Forum: Technical Help
Topic: Honda Flush Body Panels
Replies: 10
Views: 2966

Re: Honda Flush Body Panels

I see. Where I circled, low are two 6mmx1mm threaded holes for the inner panel and floor board that starts curving up. I might attach a horizontal piece of wood to it for the kick panel that is black. The upper part of the black panel would attach just to the left of the ignition switch. By building...
by DavidB
Sun Feb 06, 2022 3:48 pm
Forum: General Chit-Chat
Topic: The Daily Chat w/motor & Vintage
Replies: 559
Views: 282251

Re: The Daily Chat

That red Aero 50 has similarities to my 1983 Flush. The luggage rack is almost like mine as I tried to copy the file photos.
by DavidB
Sun Feb 06, 2022 2:44 pm
Forum: Technical Help
Topic: Honda Flush Body Panels
Replies: 10
Views: 2966

Re: Honda Flush Body Panels

I see only the attachment points where circled and compare to a file photo.
by DavidB
Sat Dec 18, 2021 11:04 am
Forum: Technical Help
Topic: Honda Flush Body Panels
Replies: 10
Views: 2966

Re: Honda Flush Body Panels

Thanks for the front view of your blue Elite that is more square and flat than the stock Flush photo I was able to find. I want to build it round, bulbous that it is, which also ranked it as one of the ugliest scooters. The only visible points for attachment to the frame are the bolts on either side...
by DavidB
Sat Dec 04, 2021 11:04 pm
Forum: Technical Help
Topic: Honda Flush Body Panels
Replies: 10
Views: 2966

Re: Honda Flush Body Panels

Removing this as it duplicates what I posted above. David B
by DavidB
Wed Nov 17, 2021 10:03 pm
Forum: Technical Help
Topic: Honda Flush Body Panels
Replies: 10
Views: 2966

Honda Flush Body Panels

Flush Rear Panel 2 with Seat 11-14-21 copy.jpg Honda Flush Photo 2.jpg I have a not-for-export 1983 Honda Flush that came without body panels, meaning the one(s) below the seat and above the front wheel. I've looked at stock photos and from the shell of a hot water tank with 50 gauge steel, made a ...
by DavidB
Wed Nov 17, 2021 9:57 pm
Forum: Technical Help
Topic: 1986 honda Elite 150d Fuel sending unit
Replies: 18
Views: 10452

Re: 1986 honda Elite 150d Fuel sending unit

The silver epoxy worked for the broken traces at around 3 areas. I'll attach photos after reducing them in size.
by DavidB
Sat Nov 21, 2020 11:30 am
Forum: General Clubs Section
Topic: seattle/tacoma guys? lookin to start a scooter gang
Replies: 16
Views: 20645

Re: seattle/tacoma guys? lookin to start a scooter gang

You can drop by my place in Renton to see my 1983 Honda Flush. It isn't licensed but someday it might as I ride a CL450K6 to work. Will provide more details via PM.
by DavidB
Sat Nov 21, 2020 11:16 am
Forum: Scooter Showcase
Topic: Honda Flush Panel Questions
Replies: 3
Views: 3691

Re: Honda Flush Panel Questions

Thanks to handyman for his aero answer, just what I was looking for. Further investigation into the metal I was planning to use it is 0.019" thick, just a bit thicker than coffee can metal. Wish it were thicker. It may be a pattern for something stronger/thicker. This metal blows through with a...
by DavidB
Sat Nov 21, 2020 11:12 am
Forum: Scooter Showcase
Topic: Honda Flush Panel Questions
Replies: 3
Views: 3691

Re: Honda Flush Panel Questions

I was mistaken to place this in the discussion I did, should have placed it in the Builder's Workshop. If someone with authority could do that for me it would be appreciated.
by DavidB
Sun Nov 15, 2020 8:26 pm
Forum: Scooter Showcase
Topic: Honda Flush Panel Questions
Replies: 3
Views: 3691

Honda Flush Panel Questions

HWT for Flush Lower Panel.jpg Yellow Flush 1983.jpg I don't know of any other current Honda Flush owners, in fact in the world, but they were made in 1983 while the Sprees and Elites were sold in the US. It is an AB19 series. My question of the moment is regarding the side panels that you'll see in...
by DavidB
Sun Nov 15, 2020 3:42 pm
Forum: Technical Help
Topic: Tachometer Questions
Replies: 8
Views: 5634

Re: Tachometer Questions

Mousewheels: Thanks for your observation. The next time I pull it out I'll check C4 out. I did run the Flush and the tachometer works, hesitating from 1000 rpm to then stabilize at 4000 rpm as MPH increases, engine RPM unchanging, which is supposed to happen with the variable speed transmission. Per...