Honda Spree and Elite 50 Forums

In the process of porting the block and i did notice the intake port on the corsa jug is not matched perfectly to the port on the block. have you guys ran into this issue? It is just on one side of the port. Is trimming the bore to match pretty common for the corsa?
TIA

hey guys
is it possible to run a stock stroke crankshaft in a block that has been machined for a stroker?
Im thinking of building a stroker, but i dont know if there is no turning back, if I machine the block.

thanks guys, i found the problem, my temp gauge is displaying inaccurate readings, i got a new one coming.

graphite9 wrote:where is your temp gauge hooked up to? cylinder head bolt or spark plug

its on the spark plug

I have a corsa bore that seems to run cold, I got a max temp of 290 ish. My plug is not wet, itÔÇÖs a light brown color. It idles fine, and pulls pretty good. I tried running 112 main and it bogs at WOT, and 114 runs perfect. I lowered the needle one notch and that helped a little. Then tried anothe...

Just wondering if there are any Vegas riders here. I see a bunch of ruckus guys here in town but no two stroke riders.