Honda Spree and Elite 50 Forums

Drove next town over(Lexington,Ky) to z50r-ghost's moped shop. He cut me some blue UNI foam for $4. Can't beat that! Thanks

Thanks for the replys guys. Ive been driving for 600miles now without one. Like i said above i only have screw backed out less than half a turn. Its been running really good. Top speed with wind at my back down hill 49mph. Only add variator. I still have the airbox and cover installed. I will be sur...

My stock '96 Elite SR doesn't have an air filter at the moment. Right now I have the Air screw turned out not quite half a turn. Does this sound about right?

I reacted a little hasty perhaps. I ended up taking the spring off and sticking it in the vice and bending inbetween the 3rd and 4th turn from the botton. I threw a zip tie around a couple of spots to maybe hinder it from turning too much to let it end up in a bad spot. Sat pretty firmly without the...

Solution(?):
rotated spring ~a half turn. If that ain't about a beesdick of space i don't know what is.

Update:

Drove it up the rode a few times turns out the tire is infact rubbing the spring. Not quite sure what would my options are now.

Got the tire in today. Decided to go with a 90/90-10 Kenda K329.

http://i.imgur.com/cI3T1n9.jpg

http://i.imgur.com/JEn1x9G.jpg

Awesome

I see it! Nice looking SR's!

Yeah that's exactly what I was thinking. Theres absolutley no way to do a Douglas wheel conversion without modifying the shock. Thats assuming their narrowest wheel is a 2+2in. Although you might be able to put a half inch spacer between the Kymco adapter the 4" douglas wheel just enough to kee...

Thanks for the help guys! Just ordered a 90/90-10 for this puppy.

Got the wheel tonight! Battling a migraine atm. Ill know more tomorrow.

Picture of wheel it's splines and max dia.

http://imgur.com/yyRapgp

One of my buddies had traded for a Ruckus earlier this week and just now gave me the extra rear wheel that came with it. As soon as I get it mounted I'll take some photos. Which should be by sometime tomorrow, hopefully.

Would it be safe to say one of these would fit? Then getting the offset right. http://www.ebay.com/itm/HONDA-ZOOMER-RUCKUS-NPS50-Dio-ZX-Elite-S-DD50-Arnada-Rear-Wheel-Hub-PCD-140mm-/181703846093?hash=item2a4e64a8cd&vxp=mtr Edit: Also found this video on getting a Douglas 4x137mm bolt pattern to ...

1man8scoots wrote:The ruckus style that is like a triangle with holes in the definitely do fit. I'm running one with a 90/90-10 metzler

1man8scoots wrote:10 x 3.0

sweet! That should make things a little easier. Just curious front or rear?