Search found 12 matches

by oldgeek
Sun Jan 10, 2016 10:34 pm
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

I have been chipping away at this build for a while now. I got the malossi RHQ crank for Christmas and have finished porting the cases. Today I slapped the crank in and set up the degree wheel. With no gaskets and a light hand torque I have 130 transfers, and 186 exhaust with the Polini Corsa. I am ...
by oldgeek
Mon Sep 14, 2015 9:41 pm
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

So I was riding the Kymco zx the other day, and I started hearing that dreaded sound like a crank bearing going bad. I pulled all the stuff from the CVT and sure enough the crank has some play in it. There is almost 15000 miles on the odometer, so I guess it is almost time? It is really a bummer cau...
by oldgeek
Thu Sep 10, 2015 1:53 pm
Forum: Non-Honda Technical Help
Topic: Vino 50 4 stroke ?
Replies: 14
Views: 3090

Re: Vino 50 4 stroke ?

Slap a Taiwan 70cc kit on it from Autotech, A tecnigas next r pipe, a bigger main jet in the stock carb, and lean forward so the front wheel stays on the ground! Mine is awesome! As 1man8scoots pointed they are the ONLY minarelli horizontal I know of that comes from the factory with the cases trench...
by oldgeek
Sun Sep 06, 2015 10:35 pm
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

birdman wrote:Hows about an AF16 build on your 94 Elite? That way with a real AF16 the sky is the limit.
Yup, eventually, hopefully.
by oldgeek
Sat Sep 05, 2015 10:35 pm
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

Greetings: Have to go back and read F3.26 in 2011 or 2012, but I vividly recall seeing 10, 300 on the TinyTach at 70. Tallish 7.57 gears though. Never say "never". Just to clarify I just put the pg short on a zx50 engine that sees 11,800 rpm with out any issue and I can only spin 9800. 5g rollers a...
by oldgeek
Sat Sep 05, 2015 6:39 pm
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

Greetings: Have to go back and read F3.26 in 2011 or 2012, but I vividly recall seeing 10, 300 on the TinyTach at 70. Tallish 7.57 gears though. Never say "never". It is a shame the gearing choices are so limited for this particular scoot. I think something in the low 9's or upper 8's would make th...
by oldgeek
Sat Sep 05, 2015 5:41 pm
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

The only gearing options for the sc10as usdm zx50 engine has only ever been the polini or malossi 16/32 gears. The 15/42 gearing you are thinking of is for a minarelli. The pg short won't be a good choice for a high revving engine. A scorpion would be the best suit for a heavy rider on a zx50. Also...
by oldgeek
Sat Sep 05, 2015 9:57 am
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

I have been researching other threads, and it seems the PG short may not be a good match for the Corsa BBK. What are some pipes that would go well with the Corsa kit, besides the PG long?
by oldgeek
Fri Sep 04, 2015 6:42 am
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

By the way for what its worth, a while back I traded a nice stock Vento scoot with a horizontal minarelli motor for a 94 Honda EliteS and an 84? Spree. Both of the scoots are in pretty rough basket case status, but I hope to eventually get them going.

So many scooters...So little time!
by oldgeek
Fri Sep 04, 2015 6:33 am
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

I might have missed something. You have several gear choices for your motor. Hello graphite9, Your help would be greatly appreciated sourcing the gears. The stock gears I have are 10.65:1 I heard that using primary gears from the AF05E will get me to 6.89:1 but that is way too tall for me, especial...
by oldgeek
Fri Sep 04, 2015 12:16 am
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Re: Noob: looking for info for a first time AF16 clone build

Greetings: If you want to go 60 on 10.6:1 gears, you will want all the RPM you can get. Corsa, or possibly Fabrizi can gin up the revs best. To me the MHR had better bottom end, but mine never revved as high as the Corsa. I would discourage you from ministroking unless you are prepared to spent som...
by oldgeek
Thu Sep 03, 2015 11:55 pm
Forum: Non-Honda Technical Help
Topic: Looking for info for first time AF16 clone build (KymcoSC10)
Replies: 23
Views: 4651

Looking for info for first time AF16 clone build (KymcoSC10)

Greetings! this is my first post on this forum, While I am a noob here, I am not a total noob to 2T motors. I have been working with the horizontal minarelli platform for a while. I have a couple mina builds under my belt and a few scooters, but this is my first AF16 build. I guess this is a really ...