Honda Spree and Elite 50 Forums

Does anyone have any verification of what the timing curve is on a stock sa50 elite Cdi compaired to the aftermarket ones?

It's a good pipe that "works" OK, you can pull some decent rpm out of them but they are more show then go. Dimensions are a little shallow to be a great pipe.

Bought same one on eBay for $35, temp probe wire is too short to be useful on a scooter. More suited for an atv which is where mine went.

For you southern folk it's called snow. It's cold to the touch, it goes best rubbed all over your kids faces.

Here's one I build many years ago. 125cc 4 speed manual in a Tomos ped.

I got the paint at colorrite.com. The front end still goes up easily. I'm running lightened 6.3g they are around 5.8g now I need to lighten them up a bit still. About the Polini/ sef combo I'm using the black guides. They look like some from a Minarelli scoot. The drive boss is 31mm but I'm using a ...

Here is that pipe finished up it fit really well. That original pic is before it was completely done. Actually that pipe had more torque then this arrow. Comparison videos https://youtu.be/g5Yb1hZvVdY Homemade pipe around 25mph it hits great https://youtu.be/84Hl2GLshsc Quick vid of arrow, seems to ...

I honestly don't remember I'm pretty sure I have the blue Polini in there. I might of had to file them. I need to lighten my weights anyway when I'm in there I'll get you some pics.

I'm still using that combo but a custom length boss. I get 100% travel on the variator. Using the marker test there is nothing left. I can measure it if you wanted. I think it's a good combo.

That pipe is done and works great it's just not as cleanly made as the arrow. I needed a pipe to complement the rest of the bike.

I have intentions of inlaying a trail tech vapor in the stock speedo. That's for next weekend the wife has had enough of me in the garage.

Thanks guys. The conversion isn't all that difficult as long as you have a welder and some basic tools it can be done. Actually the only thing I think I used a tape measure for was the wheel spacers. It's not really needed for the neck. It just costs money. I'm alittle under 2k including motor and p...

That's right I almost forgot

Here is some more tidbits of what is required to make this all work. The lower races on the elite are different then the metro/ ruckus parts. They can be easily adapted by replacing the lower race with the elite part. The upper section where the bars mount is slightly different it's just turned the ...

I need to repainted the lettering it chipped mounting it up. This is a 3.50 wheel with a 90/90 tire. It's close but it fits. With an additional offset shock you would be fine. That is the only clearance issue the tire on the shock. Everything else is good.