Honda Spree and Elite 50 Forums

tazland001 wrote:I have on of those pal covers and a new crankshaft for the variated pal. It is sooo much wider. You guys want to see pics of the case?

Taz

bet that cover is long gone!

Did anyone ever figure out what would be needed for starter set up on a this set up...

I have an SB50p with a bad crank and I'm either gonna swap to used stock crank or try to do this swap.

Jonadz wrote:I'm still fresh enough to constantly forget the kill switch is "off" while starting.

that happens when you get old too.

Jonadz wrote:If you do swap, I might be intersted in that pipe. Keep me in mind if the time comes.

find me a sweet AF16 or AF18 reasonably priced would help sway my decision...

Or maybe someone has a complete AF16 or AF18 for sale cheap? if that is the case I'd have a cylinder, piston, carb, intake, and pipe for a SB50P for sale.

I need some advice. I got this bike running a couple years ago. Replaced the carb. If I ran it everyday it would start right up If I let it sit it would take 20-25 kicks to start. I have ridden it much in the past 3 years. Now it is very difficult to start. 50 kicks, plus I canÔÇÖt give it any thro...

Hey guys, I've got an SB50P Elite E ... with a BBK, Carb, intake, and MLM sidebleed. And I believe that I totally F'd this up, and if for nothing more than for your entertainment I post the following... Couple of weeks ago at the track the starter was acting weird, and the kicker started binding, so...

You can buy an gy6 clutch and bell and have an larger clutch surace and tune it with a large and more assisted group of springs and weights. Not sure I want to get into all of that... I found a good clutch, and pulled the springs out of that, put in to my clutch, drilled equal size and located hole...

1man8scoots wrote:I thought people used the af16 style clutches on the spree also? I'm not an expert on the non variated af05e.

the way I understand it, they won't work, as it doesn't have the longer crankshaft for the 'drive' variator...

https://lh3.googleusercontent.com/xyB3-ZgJnQJxjznGpWy8XIbrp0bBaKRm9MtDcyBrmOBk1XuY-zOk91ZMrZ3Bgcswe2r1MEmEKZmU4neimXx9Dpg7DNcoyuKcbGgsvfrh4tpR9S07ib2UuUQ0GU0ALr2ICbj6uTc7E8zEMMAKjkyL6EQqyiQzvuSJ7JvUwWXOguROIkbHkU8YlcZ---mrgi7mrtaY2A6xN1MQYaBhvbNtYTHoiZNorqMpTRzqcB0VBNxcMXbduzAKeb5ZAPgT0AAo-9eoateEU...

Well I finally got to work on the SB50P! Got the BBK, carb, and the mlk side bleed pipe installed, just a couple heat cycles through it so far, need to get a different set of springs for the clutch engagement shoes, unless someone has another way to raise the clutch engagement RPM a bit. Don't reall...

not mine but d***...
https://www.facebook.com/rubiyantop/vid ... /?theater#

I apologize Motormike, i was thinking it felt more mechanical... but i pulled the plug first... oil injection bled down and lets just say that there isn't any rust issues in the motor our directly in line with the spark plug hole! Kicks over beautifully and the starter spins it over good too.... th...

So as I sometimes do, have bought this thing, started acquiring parts, but am thinking I'll do something else... I have my SB50P project for this winter and for my pit ripper, So I am thinking I'll part this out, and re-sell all the parts I just bought for it... want to fire the motor on the banana ...

I apologize Motormike, i was thinking it felt more mechanical... but i pulled the plug first... oil injection bled down and lets just say that there isn't any rust issues in the motor our directly in line with the spark plug hole! Kicks over beautifully and the starter spins it over good too.... tha...