Honda Spree and Elite 50 Forums

Hey guys, so I have the stock oil pump still hooked up with premix in tank for initial break in. The kit was supplied with a 105 main jet from chopchop himself. This is what he recommends.

First of all don't use starting fluid, especially on a brand new bore. Use 32:1 premix so you don't wash the oil off of the engine internals. Now try choking the carb by hand when cranking and see If you get fuel or If it starts. I start a new setup like that by choking by hand and if it starts ill...

Even will giving throttle ? Stock carb ? What is compression ? Stock carb running a new 90cc kit from chopchop. I dont have a compression tester but everything is new so expect it to be good. Like I said though, it will run for a few seconds on starter fluid. Im thinking the carb is gummed up but I...

So, I got the spreedio all together today and I tried forever to get it to start. Sprayed a little starter fluid and it cranked right up and died.

The bowl is filling with fuel and I have cleaned the carb. Still no luck.

Good info. Thank you

veedubh20 wrote:the base yellow gasket need to boost port, some days will piston get sieze ..

9:1 gear, spree will flip over.

should have gone polini corsa bore and 7.1 gear

Its a little late now hahaha

Also what do you mean by I need to boost port?

Got the engine all bolted up today. My buddy made a pretty trick mount that turned out great. The carb, ZX trans, and other parts should be here soon. Can't wait to get this thing fired up http://i65.tinypic.com/zjtoo6.jpg http://i63.tinypic.com/2rm71ue.jpg http://i65.tinypic.com/bim8va.jpg http://i...

ped wrote:Wow. That's going to be one good-looking spree. love the Red color.

Thanks! Gonna weld up the shock mount tomorrow and get it on 2 wheels!

Just an FYI, the kits marketed as 100cc are actually 88cc. Keep this in mind when tuning the carb.

Wheelman-111 wrote:Greetings:

Disappointed in my 26/30. The personalities questions got me as well as the one where oil "originates" in the carburetor.

Yeah that one got me considering our scooters have a sump.

22/30

Not bad

Got the big bore kit today and got it all put together. Nice looking parts. http://i67.tinypic.com/fkof88.jpg http://i64.tinypic.com/ehb0wx.jpg http://i68.tinypic.com/i40kcz.jpg http://i68.tinypic.com/339nj47.jpg Gonna pull apart the gears tomorrow and get the new set pressed and put in. Carb is com...

I have the same top end, your gonna love it, it gives a solid feeling. A tip for installing though, use the stubs, the stock size honda bolts only go in about 3 or 4 threads, mine tore out those first 4 so I have to be extremely carefull from now on. Another tip is when installing make sure your pi...

I brought an adjustable bike kickstand off ebay for 8 bucks shipped and drilled a hole in the side bar under the spalstic and bolted it in good and it works good. Build is solid, what top end are you gonna go for?? Good idea. I went with the 90cc kit from chopchop on ebay. Came with 9:1 gears so sh...

UPDATE! Got the stock engine pulled and cut up the dio mount. Still need to get the shock mount moved but, this is progress. I also need to figure something out for the center stand. The mounting holes are slightly blocked by the engine mount. http://i66.tinypic.com/sdzb6c.jpg http://i68.tinypic.com...