Search found 16 matches
- Sat Oct 28, 2017 9:38 pm
- Forum: Technical Help
- Topic: stripped carb bolt holes
- Replies: 16
- Views: 11472
Re: stripped carb bolt holes
What are the size of the stock carb bolts? I just bought a new carb and the threads are good so I just need the stock diameter and length bolts. Thank you
- Thu Oct 05, 2017 3:39 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
So whatÔÇÖs the best way to cure this ?
Should I buy a new carb on eBay or used one ?
Should I buy a new carb on eBay or used one ?
- Tue Oct 03, 2017 2:43 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
What about just replacing the Carb? Why would it run better when leaned to its side?
- Sun Oct 01, 2017 10:49 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
Ok well then that isnÔÇÖt the problem.
Any one have ideas ?
Any one have ideas ?
- Sun Oct 01, 2017 2:29 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
On the carb, there is a inlet or outlet not sure which on the bottom of the carb. Wiki labels this as "drain". Mine has no hose attached to it. Should there be a hose attached to it leading somewhere?
- Sun Oct 01, 2017 2:28 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
I have replaced spark plug I have replaced bystarter I have replaced ignition coil What did you replace these with? Alot of the no-name replacement parts are absolute junk. Some are decent...most will cause more problems than they fix. Spark plug: NGK BPR6HS Ignition Coil: https://www.amazon.com/gp...
- Sun Oct 01, 2017 2:09 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
I'm wondering now if you might have an air leak on the intake where the carb connects. Have you tried soapy water sprayed on it to check for leaks/bubbles/idle changes? I haven't tried soapy water sprayed on there. When I took the carb off to clean it I accidently stripped the carb bolts. So I used...
- Sun Oct 01, 2017 1:45 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
I believe its 40:1eclark5483 wrote:What ratio of fuel/oil are you using? Don't wanna over-saturate a Spree, it will run shoddy.
- Sun Oct 01, 2017 1:44 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
Yes air box is there with air filter in good shape. Its secure and the boot from the box to the carb is on tightJonadz wrote:Air filter, is it in good shape, is it even there? Air box lid, is it there and on securely? Additionally is the boot from the air box to the carb on securely and tight?
- Sun Oct 01, 2017 1:43 pm
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
Re: New Spree Owner Help!
Yes I didjakubman1 wrote:Did you clean the carb?
- Sun Oct 01, 2017 3:35 am
- Forum: Technical Help
- Topic: New Spree Owner Help!
- Replies: 18
- Views: 11631
New Spree Owner Help!
Please help me figure out my problem with my 1985 Honda Spree Previous Owner had engine rebuild. Deleted Oil pump and just uses pre mix gas Carb was missing air carb screw when I purchased. I have since replaced carb screw I have replaced spark plug I have replaced bystarter I have replaced ignition...
- Fri Sep 22, 2017 10:47 am
- Forum: Technical Help
- Topic: stripped carb bolt holes
- Replies: 16
- Views: 11472
Re: stripped carb bolt holes
How long of a bolt did you use ?
- Thu Sep 21, 2017 11:17 pm
- Forum: Technical Help
- Topic: Carb Bolt Falls Off - Stripped, Not Proper Size?
- Replies: 18
- Views: 10314
Re: Carb Bolt Falls Off - Stripped, Not Proper Size?
Does someone have a link to a nut that will fit in that tiny gap?
- Thu Sep 21, 2017 11:09 pm
- Forum: Technical Help
- Topic: stripped carb bolt holes
- Replies: 16
- Views: 11472
Re: stripped carb bolt holes
I couldn't find nuts that would fit in the small gap on the outer bolt? Can you send me a link where to get the proper nuts?skeeter2 wrote:I just added small nuts on the back of the carb. it seems to work fine, i had no problems
- Sat Aug 26, 2017 12:46 am
- Forum: Non-Honda Wanted / For Sale
- Topic: PWK extended mixture screw
- Replies: 6
- Views: 14692