Honda Spree and Elite 50 Forums

Don't have the other scoots anymore. I haven't been on in a while and had not updated my sig. I am just trying to figure out a way that will be fast and cost effective to get the scooter running so I can get it back to my building.

The scooter does not have a kickstart (missing kick lever) and the closest honda dealer is 1 hr. away. I am living on-campus and have no way to transport the scooter non-running.

Looking at buying a 97 elite for $325. The owner lost the keys, so I want to know if it is possible to just jam a screwdriver into the ignition to start it. A whole new set of locks is $60 from honda, and I believe it will be more to have a locksmith make a key for it without having a key to copy. I...

ALOW1 wrote:Get rid of that Uni and put a stock airbox and filter on it. Or restrict that Uni somehow so it is not running so lean.

A new airbox assembly from the dealer is close to $100. How would I be able to restrict the uni?

I got a new gasket for the exhaust so there is no leak there. I was unable to get the used exhaust pipe as it was already sold, so I patched all the holes on the exhaust with small pieces of metal and some jb weld. This thing is soooo much quieter now. I have moved the needle clip back into the stoc...

i had mine done last year when i was 15. mine were all still under the gums. I got knocked out when the did it.

the parts place can't get a bigger jet. i moved the needle clip down 2 positions and gas started pouring out of the carb and the air filter got soaked with gas. i drained all the gas out and it would still run so i took it around the block and it would run with half choke but i could ride it at full...

I am fixing a 1997 yamaha razz. It didn't have an air filter so i got a uni air filter. It will only run with half or full choke at no more than half throttle. If you go over half throttle, it bogs down and it seems like it misses where the motor will run and then quit. I didn't do an actual plug ch...

mtd made a 3 wheeler back in the '70s called a mud bug

here is a link to pictures of the work the guy does http://www.greatlakes4x4.com/showthread ... owder+cote

here is his contact info
Web: http://www.custompowderkote.com
email: jim@custompowderkote.com
phone: (989) 992-6696

He also sand blasts on site

it is probably for better ride quality and steering response

May 1st at 5:00pm

I have heard of people using Yamaha pw50 dirt bike tires. They have aggressive tread that might help you, although I would have to assume that it will hurt your take-off and top speed.

15

dac you spelled mafia wrong at the end of the video