Honda Spree and Elite 50 Forums

Hey guys im curious if anyone on the fourmn builds expantion chambers and if not if anyone has experience retrofitting a existing pipe onto a format it wasnt intended. I have a 84 honda aero 80 that someboody kartwheeled and i have straight and running ok again but the header and muffler was damaged...

Thanks for the reply I supposse im gunna be doing some research.

Hey guys so I had a friend rebuild the top end of my aero because i have been short on time to do it my self and je works at a bike shop so i figured why not. He called me saying it was done picked it up and brought it home. Started it up and immediately shut it off after it ran for like 5 seconds b...

Well I got the intake in and put on a spare stock size carb that was the throat mount instead of a flange mount style. The performance gain is very noticable and im still working with the tuning and struggling with the fact it has a straigh pipe with a muffler untill I can find a pipe that fits a 83...

Hey guys does anyone have any experience with the Naraku Big Valve manifold V.2. I just baight a new topend for my honda aero 80 and now that the motor is in running shape I wanted too look into the intake and tuning.

Was just curious if anyone is running this intake or has ised it in the past.

Ill post pictures when I can

Hey guys does anyone have any experience with the stock muffler on a 83 aero 80.

I was riding yesterday and hit a pothole and wnded up snapping the header pipe to my muffler in half.

Is it worth the time to fix the stock muffler or modify a aftermarket pipe onto the block.

And on the rollers did you go up or down from factory weight?

Well, the block has a broken exhaust stud.
So, I'm putting a new top end with a honda cr80 wiseco 48mm forged piston.
So, that gives me a good idea at the parts list ill need.
So, add some rollers and jets to my bill and I'll have to look into the reeds.

Hey guys, I figured out my issues with top speed. I need to chase down a belt. I have found a Comet cvt belt that is really close to spec., and it's on order. What are my options for the variator and the clutch? I can rebuild if I have to, but I'm not sure if there are any transmission parts out the...

Hey guys. I have been posting under the assumption that i had recently bought a honda spree and come to find out after looking at other builds and photos online i jave a aero 80. This came as a surprise too me since it only tops out at 35 on flat ground and i was wondering if anyone can geive me som...

Hey guys. New to the 2 stroke world as far as mopeds go and I want to build a mild af16 to swap into my Spree. I have read up on as much as i can find here and want your guys opinion on if I'm forgetting anything or if I'm on the right track. I am planning on picking up a af16 that needs crank beari...

Its a honda spree. Not sure wagt year it is. If you could tell me some defining year traits ill let you know on the year.

Hey guys anyone here ever tried boring over a factory or one of the aftermarket cylenders to 48mm? I know a shop that can do it but im not sure if the factory head can be bored to 48mm without sleving it afterwards. If anyone here has experience with this or knows of a thread can you leave a link or...

I'm going to grease my cables and see what happens. I'm going to probably replace the return spring in the rear and start looking for a set of forks. I would like to do a hydraulic front brake at the very least and fabbing the triple tree or integrating it into the existing setup doesn't look too co...