Honda Spree and Elite 50 Forums

This symptom points toward a pilot jet being compromised by debris or varnish. When throttle is closed, and you expect the engine to idle, it will die because there isn't enough fuel passing through the idle circuit to sustain ignition. A good cleaning seems to be in order. :urban: Thanks I ended u...

Hello, I have an 85 spree that runs just not well. It'll do 30mph, when i run at 30mph and let off and coast to stop sign the scooter dies unless I keep giving it a little throttle. The scooter idles, when I start it back up. Any ideas where i should start? When i let off the gas after a 30mph run a...

Awesome I will try and locate a lid one of my sprees came with a home made metal lid and the other without a lid. I can't find a lid anywhere but I cant go over 25 either.

Well if you want it running in tip top shape, then I would not use an eBay carb, and most certainly would not use a 21mm carb on it. That's too big of a carb for a Spree. Even with a BBK it's still too big. The block can't handle it very well. You'll lose vacuum in the venturi, not to mention tunin...

The pilot does NOT go straight through...it kinda elbows around so you never have a line of sight through it. Thanks! I got it cleaned but canÔÇÖt get a grip on the back side nut. I may try an eBay carb or may run the 21mm oko carb kit? Any suggestions would be awesome I want this spree runnin tip ...

Hello, Bought a spree last week, rode good for a few days, now it barely runs. I stripped the carb, now using bolt and nut. I cleaned the carb and can blow air through both jets but I cannot see straight through the small jet next to the main jet. I can see light if I hold it angled. Is this suppose...