Honda Spree and Elite 50 Forums

Thanks Bones! I received 2 of the 90 main jets from jetsrus, one for my 80 and the other for my brothers Aero80. We swaped out the 88 for the 90 on my brothers yesterday and it seems a bit more zippy off the line, but it bogs down/floods out at full throttle and now even has slightly reduced top spe...

Dr_rock, thanks for the reply! I also will be ordering a 90 main jet, please let me know how it works out for you!

Hi All, thanks in advance for any direct links or recommendations. As the title indicates, i am looking for a website to purchase a 90 main jet for a 84 Aero 80 - it has a venturi dia pb54d 16mm carb. I can't seem to locate one i know for sure is compatible.

Sorry about the repost - this reply is showing on my desktop, but not my mobile, so I am re-posting in hopes it will show on mobile since that may be a preferred method of contact for users; I called my local honda parts dealer and they verified the belt for it is no longer made and none of the shop...

Hondafan, how did you make out with this issue, if you remember over 5 yrs later?

Thanks once again for the advice, i will replace the belt to rule that out, i checked the specs when i replaced the weights and the top side of the belt was at the top end of the spectrum , per the service manual. I don't believe any oem belts are made anymore, the best match i can find is a comet g...

Thanks again for the help! Feel free to pass on a response here, but i am also struggling with my top end speed, its only hitting 35 mph max, however It seems to runs great other than that. I just replaced the variator weights with the stock 16g, any experimenting with lighter ones? Would that help ...

Thanks for the quick responses! My concern is when I removed the dipstick bolt, a fair amount of oil did leak out, even when I leaned it to the right to the point where gas was leaking out. If i understand correctly, i should use a syringe of sort that will plug the hole, as well as allow me to inje...

Nube here as well, I searched the service manual and the wiki, I still cant figure out where the final reduction case fill point is. Any help is appreciated .