Search found 5 matches
- Wed Jun 12, 2019 12:30 am
- Forum: Performance Technical
- Topic: Help Choosing a Variator
- Replies: 3
- Views: 5826
Re: Help Choosing a Variator
I have the Keli/SEF setup on 2 of my scooters. I love the price/quality/performance. I don't use the Keli on a zx trans setup, I recommend a polini for ruckus vari because it has a larger diameter. What differences do you see with the polini ruckus variator? Top speed, acceleration? Please let me k...
- Wed May 08, 2019 1:29 am
- Forum: Performance Technical
- Topic: 2000 Elite SA50P mild build
- Replies: 2
- Views: 5513
Re: 2000 Elite SA50P mild build
Hit 45-48 mph all day today (220 lb rider) in 45 degree whether with freshly installed 9.8 secondary gears. Full list of mods for my 01 SA50P are: Stock bore 9.8 secondary gears (twh 15/42) Derestricted exhaust Polini variator w/ 6.9g weights Stock belt Stock clutch Stock carb Stock exhaust Fully zi...
- Tue May 07, 2019 11:44 pm
- Forum: Technical Help
- Topic: 2001 SA50P Elite Transmission Cover/Gasket Help
- Replies: 4
- Views: 2941
Re: 2001 SA50P Elite Transmission Cover/Gasket Help
And yes my 2001 has the plastic thrust washer and metal thrust washer. Parts diagram shows that both are supposed to be installed.
- Tue May 07, 2019 11:38 pm
- Forum: Technical Help
- Topic: 2001 SA50P Elite Transmission Cover/Gasket Help
- Replies: 4
- Views: 2941
Re: 2001 SA50P Elite Transmission Cover/Gasket Help
Thanks for the input guys, much appreciated. Here is what I did to solve the problem. I found that the aftermarket trans gasket was much thinner than the OEM Honda. I figured the thin gasket was making the case close too much and pinching it. I bonded 2 of the thin gaskets together with gasket seale...
- Tue May 07, 2019 12:54 pm
- Forum: Technical Help
- Topic: 2001 SA50P Elite Transmission Cover/Gasket Help
- Replies: 4
- Views: 2941
2001 SA50P Elite Transmission Cover/Gasket Help
Hey everyone, new to the site, so thanks in advance for the help. I recently bought new 9.8 secondary gears for my SA50P. I had the 42T gear pressed on with no issues, reinstalled all the washers properly, but when I put it all back together (with a new aftermarket gasket), the case closes to the po...