Honda Spree and Elite 50 Forums

Bump

Looking for someone who lives in North Alabama and has some Spree inventory. Thank you!

I've had my 1987 Elite SE50 for 6 months now and recently I've been sorting out some fuel/air issues. But, I believe I need to take a step back and validate what kind of hardware I'm working with first. I've got some photos here https://imgur.com/a/b6B21g0 showing the motor, exhaust, carb, and airbo...

Meatball, thank you for the information. The washer and gasket on the air/fuel screw were not there to begin with. Luckily I found one lying around from another bike that seems to fit perfect. Time for reassembly

https://imgur.com/a/GQatqif Float bowl gasket is obvious. The one at the bottom left of the float bowl gasket looks like throttle/carb gasket. I think the gasket on the bottom right is float drain screw gasket. One at the top might be auto bypass gasket. I really don’t know what the smallest one in...

I am surprised that you don't like the front of the Elite when the 87 Elite is one of the most sought after model in some markets. My personal opinion is that Spree is a total waste of time. Trying to fashion a front-end body out of sheet metal would likely prove to be a daunting and un-fruitful ex...

I’ve recently picked up my first two scooters. An 86 Spree (Iowa) and an 87 Elite 50S. https://imgur.com/a/MvlFx4x The Spree sat in a barn for about 30 years and humidity got the best of it. The gas tank was rusted out and needed to be replaced and the transmission needed to be rebuilt (bearings, se...