Search found 7 matches
- Thu Jul 18, 2019 10:43 am
- Forum: Technical Help
- Topic: Elite S Dies after full throttle rushing
- Replies: 7
- Views: 4167
Re: Elite S Dies after full throttle rushing
Sounds like the air/fuel screw is not adjusted perfectly. It may need the exhaust washer opened all the way then adjust carb again. 👍🏼 Be sure there’s no leak at exhaust connection. Thanks for the input. I don't think there leak at exhaust. Is there a certain way to adjust it? First off, both wheel...
- Wed Jul 17, 2019 10:36 pm
- Forum: Technical Help
- Topic: Elite S Dies after full throttle rushing
- Replies: 7
- Views: 4167
Re: Elite S Dies after full throttle rushing
Thanks for the input. I don't think there leak at exhaust. Is there a certain way to adjust it?
- Wed Jul 17, 2019 10:34 pm
- Forum: Technical Help
- Topic: Elite S Dies after full throttle rushing
- Replies: 7
- Views: 4167
Re: Elite S Dies after full throttle rushing
Greetings: If the head-pipe is still even partially restricted by the washer remnants, a 78 will be too much jet. The mixture will be excessively rich, which fits with a top speed of only 38. That scooter should break 40 easily if the power was unimpaired. You could be fouling the plug with too muc...
- Wed Jul 17, 2019 2:58 pm
- Forum: Technical Help
- Topic: Elite S Dies after full throttle rushing
- Replies: 7
- Views: 4167
Elite S Dies after full throttle rushing
Thanks in advance! I have a 99 Elite S. I derestricted it by removing the restrictive plate behind variator, drilled the washer (not all the way, the whole of the washer is like 1.5-1.75 times larger than stock), up the jet to 78, zip-tied the oil pump all the way. I also am adding 1 oz toil o the f...
- Sat Jul 06, 2019 2:18 pm
- Forum: Technical Help
- Topic: SA50P won't start
- Replies: 5
- Views: 3061
Re: SA50P won't start
Did you just acquire this scooter? You don't need to take the engine apart. Did you remove the intake manifold from the motor? If you did, then it could be leaking air if not completely sealed at the connection to motor. If you did not remove it, then the carburetor is probably still clogged somewh...
- Fri Jul 05, 2019 11:46 pm
- Forum: Technical Help
- Topic: SA50P won't start
- Replies: 5
- Views: 3061
Re: SA50P won't start
My bike engine shutdown while I was riding it. Did so much and found out that air filter "dissolved" for being 20 years old. Part of it was sucked in the carb and intake. I cleaned the carb and intake. Now it starts only on full throttle and will die if throttle released. While running on...
- Fri Jul 05, 2019 10:33 pm
- Forum: Technical Help
- Topic: SA50P won't start
- Replies: 5
- Views: 3061
SA50P won't start
My bike engine shutdown while I was riding it. Did so much and found out that air filter "dissolved" for being 20 years old. Part of it was sucked in the carb and intake. I cleaned the carb and intake. Now it starts only on full throttle and will die if throttle released. While running on ...