Honda Spree and Elite 50 Forums

Guys she's running pretty well with one very slight concern, from dead stop, if I go full throttle it has a slight bog and catches on and goes. I don't know if its rich or lean. It improved slightly by putting a small piece of foam blocking air intake on outside of filter house which I'm guessing it...

Thank you again.... Last piece to the puzzle. I will install this evening. She's running pretty good right now, thank you and others for the help, much appreciated.

Excellent, read Manuel, 1 7/8 for 1985. Also, how important is the bypass cover to function of unit? I didn't put it back on.

Thanks very much.

Well its running. I took compressed air to spark plug port, blew out excess gas, went full throttle and it started. However, it still won't start easy until I open the throttle and then she starts. Like to know stock air screw setting if someone can share I would appreciate it. Tom

Wheelman, the seat is what the rubber tip needle sits in, correct, technique...how do you polish it. Just take any needle and turn/polish it in the needle seat? I took carb apart and it seems to have good seat. Maybe I should get a carb kit. The fact I see spark when I ground the spark plug I can't ...

Thanks...I'll give that a try. I should of noted I had to carbs which I tried, however, I didn't disassemble the float needle in both, I only checked float height. Appreciate the help.

I also pulled Reed valve and they seem to be tight.

Set float at 12mm..,not 13 typo

1985 spree, I've had this for 10 years, gave it to neighbors daughter and son to ride 3 months ago. Yesterday boy starts and begins to ride and he indicated it died. This is what I've checked,: It has spark and I placed new plug as well. Pulled bypass, put 12 volts to it and needle grew and have 4.7...