Honda Spree and Elite 50 Forums

I have a few posts on this scooter and finally fixed it. I would like to share the solution. With all the help I received here the scooter would still only run about a half mile then quit. Restart run a second or two then quit. After setting for a while same scenario. I took it apart for the fourth ...

Well I was going to try to be funny with an " off color" comment regarding the motormike response! But I guess you need to know your audience first and getting thrown off the forum wont help me!!! Thanks again to all you guys for the help! Ill let ya know how I make out when I get too it a...

I replaced the petcock with a new one. Ill will replace the vacuum line to the petcock. I did check it out when I replaced the petcock by blowing in it but maybe it has a small crack in it. Ill bring a screw driver for that check also. Thanks for the help again!!!

First want to thank bonesv for the help. I got the new air cleaner element light coating with two stroke oil carbs spotless. Choke ( enrichener works on the bench as the 12 volts). Ran it today same problem other than it would start right back up then stall again after a few hundred yards. I am at a...

I am trying to understand exactly how the spark is produced. Reason being Im having trouble with my Malaguti Yesterdays spark. On almost everything I have ever worked on the flywheel spins at a certain point the magnet passes the pickup then makes and breaks the coil to produce the spark. The flywhe...

Thank you so much!!!!!

This scooter runs a half mile or so then quits. Restarts after a minute or so goes about 50 yards then quits. Then cant get restarted for about 5 minutes. Here is what I have done. 1: replaced and tested fuel petcock vacuum and gas supply line 2: cleaned carb made sure cleaned well 3: choke was remo...

its a 2003 MAL 45SVB49 015733

how can I tell what year and model? Its a maliguti yesterday 50cc

The stator went on this basket case I said I would try to get running for a friend. The stator was no good and a direct replacement ( ducati ) is very expensive. I bought an aftermarket one the manufacturer said would work but no instructions! I have a schematic but its in Italian and Im having trou...