Honda Spree and Elite 50 Forums

So I got the cp 19mm kit with all the accessories and jets needed along with a stage 6 dio big valve intake kit and the swap shop adapter. I'm in Houston what should I start my jetting at? I know I saw a video where swap shop said the 40 pilot it comes with is way to big. And I think I saw a swap sh...

Quick question I'm looking at the tech manual and it's kind of hard to determine. When measuring the clutch pad do you measure all the way down as in including the stuff the pad it stuck to ? Or the little pad onto itself ?.

Thank you thats what I was thinking myself . How about the 21? Any thoughts on that or is it overkill ?

should i go with the 19mm or the 17mm polini cp?
bike has malossi bbk, ported intake + dual stage reeds , s23 pipe . keli variator +koso ramp plate

so i have a 86 aero 50. with the following mods. malossi bbk keli variator + koso ride plate . 8.5 g rollers - s23 slick willy pipe dual stage reeds + ported intake - ordered the following contra spring +clutch springs , torsion control pad , 8g rollers and 7.5 im still running the stock carb and fi...

so i got a malossi bbk kit and a s23 slick willy pipe i know the bbk kit comes with a #88 or somthing from what im reading once you add a pipe it needs to be upjetted more. running the stock air box for now. i bought a carb off a guy local to me that has a #92 jet that had the same combo BUT from wh...

so i found some on amazon that had some pretty good reviews . whats your thoughts on this https://www.amazon.com/Dewhel-0-02A-10A ... geNumber=2

So this is a kx65 reed set from searching that part # ?

old post! i know .. can you explain how you did the headlight im going to do the ebay cheapo route or mod mine for a different halogen bulb

so i removed the flywheel with a flywheel puller tool to clean all the magnets and contacts ( they where filthy to say the least could not even see the magnets from the rust and gunk build up) now going back to install the flywheel any tips or tricks to hold the thing down without the special tool h...

yeah i dont mind spending a extra 10$ to be able to get it locally same day will try out the EP50 and see how it works out just need to decide on how im going to mount the blinkers

does anyone know if the honda aero 80 inner glove box would work on a honda aero 50? i know there different part numbers but they look almost identical other than colors.

so looked that up and there is 3 options for the 2 plug setup similar to the stock honda one . that would be (ep37,ep50,ht47) which of those 3 would be the one to get?

funny thing is even before i could post the listing from ebay it sold yesterday for 100$! i feel bad for whoever bought that knowning the above information now !!!.

I'm thinking about getting these for my aero 50 and mounting them in between the mirror post and the mirror ! possibly or some small flush mounts on the headstay cover https://www.ebay.com/itm/2X-Mini-LED-Motorcycle-Turn-Signal-Indicator-Amber-Blinker-Light-Lamp-Black-US-/124436155399?mkcid=16&m...