Honda Spree and Elite 50 Forums

I have a 1985 Honda spree that will not start even when I put ether in the cylinder it. I tested spark and it was working good. But, when I put ether into the cylinder, I start seeing it leaking out from under the cylinder somewhere. Any tips on how to fix it?

I am trying to get my 1985 Honda Spree Running. I put a brand new carb, spark plug, basically everything. The compression is at 135 psi. But I can’t get it running. I even put a gas/oil mixture into the cylinder and it still didn’t start up.

The nut holding the rim*** sorry if that confused anyone

I am trying to change out the rear tire on my 1985 NQ50 Honda spree. I have taken the exhaust off already but the nut that is holding that tire is on way too tight. It will not come off. I have tried a rachet, impact drill, and even a wireless drill. I EVEN PUT PENETRATING OIL BUT THAT NEVER EVEN WO...

I think that I found the problem, the reeds were closed air tight shut

I have a honda spree nq50 1985. The compression is 140 psi kn the electric start and I don’t know why fuel is not getting to the engine. I checked the vacuum and couldn’t feel any suction

I checked everything and even the crank seal but the vaccum just wont work. Fuel only comes out when i suck on the vaccum line.