Search found 7 matches
- Sun Oct 16, 2022 6:59 pm
- Forum: Technical Help
- Topic: Honda spree not starting
- Replies: 1
- Views: 600
Honda spree not starting
I have a 1985 Honda spree that will not start even when I put ether in the cylinder it. I tested spark and it was working good. But, when I put ether into the cylinder, I start seeing it leaking out from under the cylinder somewhere. Any tips on how to fix it?
- Thu Oct 13, 2022 6:08 pm
- Forum: Technical Help
- Topic: Can’t get Honda spree to run
- Replies: 2
- Views: 690
Can’t get Honda spree to run
I am trying to get my 1985 Honda Spree Running. I put a brand new carb, spark plug, basically everything. The compression is at 135 psi. But I can’t get it running. I even put a gas/oil mixture into the cylinder and it still didn’t start up.
- Tue Oct 11, 2022 8:57 pm
- Forum: Technical Help
- Topic: Honda spree tire change HELP
- Replies: 2
- Views: 619
Re: Honda spree tire change HELP
The nut holding the rim*** sorry if that confused anyone
- Tue Oct 11, 2022 8:56 pm
- Forum: Technical Help
- Topic: Honda spree tire change HELP
- Replies: 2
- Views: 619
Honda spree tire change HELP
I am trying to change out the rear tire on my 1985 NQ50 Honda spree. I have taken the exhaust off already but the nut that is holding that tire is on way too tight. It will not come off. I have tried a rachet, impact drill, and even a wireless drill. I EVEN PUT PENETRATING OIL BUT THAT NEVER EVEN WO...
- Sun Oct 09, 2022 3:04 pm
- Forum: Technical Help
- Topic: No Vaccum for fuel to get to engine
- Replies: 4
- Views: 822
Re: No Vaccum for fuel to get to engine
I think that I found the problem, the reeds were closed air tight shut
- Sun Oct 09, 2022 12:43 pm
- Forum: Technical Help
- Topic: No Vaccum for fuel to get to engine
- Replies: 4
- Views: 822
Re: No Vaccum for fuel to get to engine
I have a honda spree nq50 1985. The compression is 140 psi kn the electric start and I don’t know why fuel is not getting to the engine. I checked the vacuum and couldn’t feel any suction
- Sat Oct 08, 2022 8:48 pm
- Forum: Technical Help
- Topic: No Vaccum for fuel to get to engine
- Replies: 4
- Views: 822
No Vaccum for fuel to get to engine
I checked everything and even the crank seal but the vaccum just wont work. Fuel only comes out when i suck on the vaccum line.