Honda Spree and Elite 50 Forums

Hi- been struggling with the kick starter / spring / etc. First it would not spring back up. I can manually return it and try again but the assembly seems to be wobbly. Tracked it down to the snap ring. Looks like it's expanded a bit and needs to be tossed and replaced. There's some play there that ...

Great advice @Meatball and @zz28zz! Not a lot of content on this model so much appreciated!

Thanks.. good news (I think) as I wasn’t ready to build or buy / make any more single use tools to remove the parts!

Haven’t found any gaskets online if anyone knows of a site pls post otherwise I can use some gasket maker and reassemble.
Thanks!

<Correction>
Symptoms
-Spin the belt manually and the rear wheel does not spin
-Spin the driven gear (left) and the belt spins, pinion starter is not engaged ( too recessed to engage with driven gear ), but the rear wheel does NOT spin
-Spin the clutch pulley and only the rear wheel spins

Hi I'm troubleshooting a 1994 SR Elite that has been in a garage for maybe 10+ years or so. I can kick start it and get it fired up, rev the throttle, which shows promise. I did notice that the rear wheel is not spinning when I increase rpms. So I removed the kickstarter covers and can see that the ...

Thanks @meatball for the feedback. Guess I need to asses the situation and see what next steps are and if parts are even available.

Sorry for the late response. I was able to change out the 2-stroke oil and replace it. Checked the oil pump marks and it is lined up OK. Added some 2 stroke oil to the gas as well and sprayed a little sea foam fogging oil into the cylinder to lube it up a bit. Was able to fire it up by kick starting...

Re-phrasing the question: is there an oil drain plug on the 1994 SR Elite? -Carey

Hi - new to the forum and new to the SR Elite. Downloaded the user manual for the SA 50 hoping there's very little change between the 2 models. The previous owner provided very little other than it's been sitting a long time and local handy man says it needs a new carb. Removed the gas tank, all gas...