Honda Spree and Elite 50 Forums

I had something like that happen when I got my Elite it was sitting for so long the oil from the tank had filled the crank case and when I tried to start it it blew the oil seals out and made a huge mess.

Well good folks I installed a base gasket of 0.39mm and just skipped the head-gasket and just copper spray the head now I have about a 1mm squish. With the compression test COLD with little oil down the spark plug hole I got around 155psi at first then tested about 5 more times with a 14mm socket on...

Meatball wrote: ↑Mon Oct 09, 2023 4:17 pm Are you sure that isnt a stroker bore?

I acquired the 50mm Kit and the NCY Dio / Elite pipe for it at SSS. I checked the deck heights on stock cylinder 62.5mm and the NCY 50mm is 68.1mm, shouldn't they be the same height?

Hello Everyone I'm about to install the 50mm NCY cylinder just had a question the piston covers about 1.4-1.5 mm of transfer ports and the exhaust https://i.ibb.co/JxC7zw6/20231009-121836.jpg https://i.ibb.co/5MYGxm8/20231009-121927.jpg Is this normal I check the port timing Exaust opens at 92 degre...