Honda Spree and Elite 50 Forums

Welp, taking no chances, returning the rim.
Thanks again for the input guys.

The front rim on an 86 aero of mine had a very out of round drum so I bought an 89 elite front rim which mounted right up, but isn't quite the same... The drum dish on the elite rim, towards the brake panel, is about 3/8ths of an inch shallower id say than the aero's leaving the brake assembly pad ...

The front rim on an 86 aero of mine had a very out of round drum so I bought an 89 elite front rim which mounted right up, but isn't quite the same... The drum dish on the elite rim, towards the brake panel, is about 3/8ths of an inch shallower id say than the aero's leaving the brake assembly pad a...

Thanks for the reply zz28zz, I thought it was an issue myself.

I ended up buying a clone carb off Amazon and swapped the OEM emulsion tube, main jet, slide and needle into the clone and to my surprise it fired right up and I was able to tune it well enough. Runs great now

I'm aware of that. If you read my whole post I am calling it the "choke emulsion tube" because I am unsure of what to call it. It's the brass tube where the choke picks up extra fuel that I am talking about. It doesn't fit snuggly where it is and I am wondering if this could be causing an ...

Hello all, I have a pair of Aero 50's, one being an 86 and the other is an 87. While cleaning my 86's carburetor I noticed the choke "choke emulsion tube" being loose and falling out of place and won't sit snug where it should be. I'm having issues with the bike running right when first st...