Search found 21 matches

by pcs0snq
Sat Sep 19, 2020 11:55 am
Forum: Technical Help
Topic: 1985 NQ50 fuel level gauge wire
Replies: 1
Views: 1467

1985 NQ50 fuel level gauge wire

Trying to figure out did Honda use a 3 or 2 wire tank level sender on the 1985 model. Mine is 3 and my harness has 2 wires. Gage just sits past E, maybe moves lower some with green ground connected and one or the others connected. I removed the sender and checked for resistance change and that looks...
by pcs0snq
Sat Mar 07, 2009 3:08 pm
Forum: Technical Help
Topic: another Auto bystarter question
Replies: 3
Views: 1382

Kenny_McCormic wrote:Sounds to me like it needs a carb cleaning.
OMG Not again lol

You may be right. I'll check it and see if it moves this time with patients
:oops:
by pcs0snq
Fri Mar 06, 2009 3:28 pm
Forum: Technical Help
Topic: another Auto bystarter question
Replies: 3
Views: 1382

another Auto bystarter question

Yes I read the how it works and also the service manual, but I could not find how it works if "in hand". My coil is good, but it does not seem to move the center needle or outer sleeve. I pushed in in with my finger and don't feel it move as I would expect. I tried various position as I po...
by pcs0snq
Sat Dec 13, 2008 6:28 pm
Forum: Technical Help
Topic: Fuel tank valve
Replies: 8
Views: 2764

I have an update :lol: Before I bought this fuel valve (see link below) I asked the seller if it would fit a NQ-50 and he said "YES". Note the seller says fits all years off the spree but it did not. The screw on nut is way small. He says he has a 15mm one, but I asked him to call. We have...
by pcs0snq
Thu Dec 04, 2008 4:31 pm
Forum: Technical Help
Topic: Fuel tank valve
Replies: 8
Views: 2764

Thanks I just inspected it and don't see any sign of old gas build up and the vac ports does not leak. The good news for me is I just found a new one on ebay and for $26 will put this behind me. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=320314066467&ih=011&ss...
by pcs0snq
Thu Dec 04, 2008 1:42 pm
Forum: Technical Help
Topic: Fuel tank valve
Replies: 8
Views: 2764

Fuel tank valve

On my Black NQ-50 I found the valve did not shut off with vacuum so I'd say the only thing to stop fuel when off was the carb needle and float. Seems most stuff like this is not designed to take a part and fix. Any one see this before and know if it can be lived with or repaired?
by pcs0snq
Wed Nov 26, 2008 9:12 pm
Forum: Technical Help
Topic: Spree NQ-50 oil injector
Replies: 5
Views: 2038

Well I replaced it with one from ebay and all is good. Seller tossed it in the carb deal for $10 more. The carb was a deal of a life time. Now both my NQ-50's are running perfect. check out this score! woot! Darn just looked and the pic's are gone. It included a perfect By-starter and the carb was a...
by pcs0snq
Sun Nov 16, 2008 12:28 pm
Forum: Technical Help
Topic: Spree NQ-50 oil injector
Replies: 5
Views: 2038

thnaks is the seal an o ring on the shaft that pulls out with pump in hand? Oil in crank case, does that cause her to smoke bad?
by pcs0snq
Sun Nov 16, 2008 12:17 pm
Forum: Technical Help
Topic: Spree NQ-50 oil injector
Replies: 5
Views: 2038

Spree NQ-50 oil injector

I searched and read but could not find. I have tw NQ-50 bikes and my older dependable one had a real bad smoke issue. Thick smoke running. I swapped pumps from my 2nd newer bike and now the older one is perfect. Now to the pump. Turning the shaft with a drill I expected to see some flow yet none at ...
by pcs0snq
Fri Oct 31, 2008 9:58 pm
Forum: Technical Help
Topic: Gas tank level gauge?
Replies: 1
Views: 1114

Gas tank level gauge?

Gas tank level gauge?

I have three wires from my gauge, but one (the Blue/wht) has no place to connect. Any ideas?

The yellow/Wht and Green have a place to plug in

Older NQ-50 Spree

Thanks
by pcs0snq
Sun Aug 10, 2008 9:16 am
Forum: Technical Help
Topic: NQ-50 spree's carb help
Replies: 22
Views: 6412

If you every find out why, let me know and I'll do the same. Just post in on this thread. I'll get an email notification like this time. I have concluded that this little issue has bested this sites SME's :cry: Mine is odd and this may be a big HINT. I had my carb off at least 4 times. Upon stating ...
by pcs0snq
Fri Aug 01, 2008 9:39 pm
Forum: Technical Help
Topic: NQ-50 spree's carb help
Replies: 22
Views: 6412

ttt Hey it's the weekend and my favorite task lol anyone Trying to get an idea what to look for. NQ-50 will not take gas above like 1/2 throttle. I can ease it up to like 25mph but it gasps if a squeeze in anymore. Had the carb off 4 times now I know lol Odd part is on this last go around, it worked...
by pcs0snq
Sun Jul 27, 2008 8:39 pm
Forum: Technical Help
Topic: NQ-50 spree's carb help
Replies: 22
Views: 6412

Maybe I missed it and hope I did not * anyone off, but I'm looking for what to look at next that could cause the bike to not take gas as I described. All I can think of is take it all apart agian and look. I still need to mess with that Auto Bystarter. Thanks for the tip on the filters. I pick a pai...
by pcs0snq
Sun Jul 27, 2008 1:07 pm
Forum: Technical Help
Topic: NQ-50 spree's carb help
Replies: 22
Views: 6412

Just took it for a test drive around 1 mile or so with like 6 starts from a stop. It will just do just 25mph. When I go WOT it just gasps like the fuel is GONE. That's like anything above 1/2 throttle tries to kill eng. Very Good idle and low RPM throttle. This bike only has 950 miles on it What now?
by pcs0snq
Sun Jul 27, 2008 12:45 pm
Forum: Technical Help
Topic: NQ-50 spree's carb help
Replies: 22
Views: 6412

I must have other issues. It does not feel like it hi speed rich. Feels like Hi speed lean. I'm going to try and take it for a ride now and see if it does better on th road as opposed to on the stand... It's odd (to me) because it worked sop well when cold or at least 1st started. I wonder if I can ...