Honda Spree and Elite 50 Forums

Thanks for the replies fellows, one person says 9:1 will work just fine, then someone else said do not go with 9:1 and go with 10:1 , it seems the 9:1 gears are readily available,i seen Daywot has 9.8 gears which are closest to 10:1 but says you only get like 2-3 mph increase which does not seem muc...

Hey guys, i talked to vt cycles yesterday and they told me with my stock motor and keli variator that i would be best off with and get the best performance with 10:1 gears and that 9:1 gears would not be good and i would get the same top end on my stock motor with 10:1 gears opposed to 9:1 but they ...

needfasterthan31 wrote:do i have the same petcock as the honda spree?

I see the se 50,sa,50,nq50 Elite 80,125 petcocks are all the same, I bought one off of ioffer.com and i hope that takes care of my problem.

thanks guys and thanks evilone for answering that question about the center spring.i understand that and it seems if i was to go with the big bore,carbs,and pipe that i would probably change that spring? it but i think ill keep it stock for now.when is it a good time to change the center spring? i ...

...and yes your english sounds like the chocolate brothers who sell crack down on 6mile in d-town but hey everyone can learn.no offense. LMAO :lol: ... I thought that I had heard it all, but chocolate brothers? Will def have to store this in my vernacular for future use... Im in cali, so slang is a...

do i have the same petcock as the honda spree?

on my 2001 honda elite sr50 i noticed not too long after i got it(2 months ago) after messing with the air screw turning it in all the way then back out it is usually wet with gas(not dripping out or nothing like that) but it runs great but in the morning or if it has sit for hours i do need to hold...

Greetings: Don't change too many things at one time, or you will end up more confused than ever. Clutch springs (3): If your engagement speed is OK, don't touch. If it starts to "bite" just off idle and has to struggle to get going you can increase engagement speed with stronger clutch sp...

i seen a commercial for them on youtube.com and they said being that they are flat when you are at top speed they go up higher than the normal round rollers which creates a higher gear and more top speed.thats just what they say.thanks for the reply and im hoping to get a few more replies from peopl...

yes, if you do the front pulley you have to change the center spring & clutch springs. maddog or anyone: what weight center spring and what weight for the clutch shoe springs do i get?,im ready to order them but not sure what weights,my ride is all stock except for keli variator with 9 gram rol...

ANBODY TRY THESE DR.PULLEY FLAT SLIDING WEIGHTS INSTEAD OF THE STANDARD ROUND ROLLERS.I WAS THINKING ABOUT GETTING THESE BUT THERE OUT OF THE 8 GRAM WHICH I WANTED.I THINK THESE ARE 5 GRAM. [/url]http://cgi.ebay.com/ebaymotors/Dr-Pulley-16-13-5g-139QMB-ZOOMER-Lifan-Kymco-50cc_W0QQcmdZViewItemQQ_trkp...

this is a link to one i seen on ebay.i hope the link works as this is the first time i tried this.that photo of the homemade one doesnt look bad at all.
http://cgi.ebay.com/ebaymotors/Speedo-m ... 2004r25516

thanks for the info guys. dac:that is the same speedo as mine wheelman:my needle keeps going and theres no restrictor.i know these speedos are off and show more from the factory by at least a few miles an hour,so basically my elite on flat ground is usually in between the big F and the little F and ...

thanks for the photo of your speedo.mine is a little different but not too far off.its an 01 elite sr speedo.how do i post a photo? ill look into myself right now,thanks.

where is capping the speedo at? im going off the fuel gauge letters.there is the E and the F