Honda Spree and Elite 50 Forums

Change the spark plug! You should change your profile message and leave God out of it. I was shocked when i seen it and that they let you leave that on there. You should be ashamed of yourself!!!!!! How dare you rip on God!!!!!!!!!!!!!. He is the reason you are here and wake up every day alive. Thi...

not completely sure what your asking but it sounds like you have a kilswitch issue, does it stay running with the key out? or is it turning off while you are driving around? It will not stay running with the key out. All the functions works fine. I even have the original headlight/turn signal bulbs...

Hi, I have a 2001 Elite SR-50 with 13,200 miles. At 9800 miles i put on a 72cc Polini Contesta kit and R1/Kalon Turbo pipe. I have 9:1 gears,Keli variator and stiffer clutch springs. Everything else is stock. I just replaced the coil wire because it was cutting out quite often but ran great and woul...

I have the same Elite and same setup all around. I also bought the Daytona jet kit and started with 100,then,95,then 90, then the 85 jet was perfect. I also am curious what works for you and which carb and jets work the best because i want to keep my stock airbox because of the noise issue with a po...

Hi. I am not sure which carb i want to go with, but as long as it is a quality carb like Keihin or Mukini which i know are good carbs, but i also know Polini is a very good quality name and i have the cylinder on my Elite so i figured i would go with them. I just thought the Polini would be a nice q...

Yeah i know i posted the tire make at the last moment but it was a big 3.50 tire. Side by side to my old bald 90/90 was a couple inches difference. I could tell there was no way it would fit. That Michelin S-1 must be on the smaller side of the 3.50 tires.

Thanks for the replies. I just got The Polini Contesta kit and pipe today but cannot put them on until i get some jets. I am going to go with the stock carb for now until i get the Polini carb from Daywot which i hope and plan on doing. I see he is again selling the Daytona jet kits but i will have ...

I had to run out while i still had a vehicle so i just went with a 90/90-10 again. Next time i will order up a Michelin S-12 3.50-10. I finally found a posting that said that tire works.

Feichi type 3.50-10. Thats what the tire says. In about 1 hour i need to take it up there or i wont have a vehicle. I hope i do not have to pay twice for installing a tire and have to buy another one. let me know if you heard of this tire not working hopefully soon.

Thanks.

I just went a bought a 3.50x10 rear performance style tire for my 2001 Elite sr50 and am wondering if it will fit my bike.. I am going up to the local bike shop tomorrow and going to have them put it on my rim but just want to be sure. I searched through posts and only found people talking about the...

Yeah, that sounds right because the local shop which was not a dealer said they only could get an 88, should i just order a few of them and get a drill kit and be good with the jets? I will contact Daywot and see if he has any or that .com site you said about also.

Thanks.

Thanks for the advice. There is a Harbor Freight not too far from me. I will grab one of those kits. Daywot said he was out of them jet kits when i got the pipe and bore kit. Would a Honda dealer stock the jets or do i have to order them from them. If so i need to order them now. I think everything ...

Hi, I will recheck that site out and see if i can find English but isnt there a site in the U.S.A. that carries those carbs that let you keep the stock intake? I guess i will call an actual Honda dealer and order some jets, or at least get a couple larger ones. I do have an R1 pipe coming with the C...

I tried that first site which seems to be in European language so ill pass on that. I guess for know i will take daywots advice and get a bigger main jet for my stock carb for now then eventually upgrade to a bigger 24mm? carb or? So anyone know what size main jet i will need. I called the local bik...

Hey fellows, I ended up buying a Polini Contesta bore kit and a R1 muffler from Daywot. I still would like to get a bigger carb and cannot afford a $199.00 Polini from him, but what mm size carb will i need now because my stock carb isnt that great anyways. And do i need to rejet the new larger carb...