Honda Spree and Elite 50 Forums

So I put on the stock exhaust off my wifes aero and seemingly fixed the exhaust leak. Still only wanting to start with throttle open... Then I noticed my petcock was le aking slightly, pulled the tank and started it to run some of the fuel out that was in the line. Low and behold after a second it w...

On second thought, i'm pretty sure I have an exhaust leak. Came back down to the garage right after I posted that, and I have the lovely sludge dripping down onto the lift...

ok so i got it all bolted in and started, however it wont start unless i crack the throttle. plug looks a little wet, but not too much. im thinking its to much pilot jet. sugestions? however on a side note, i know wheelman always said his malossi kit was more raspy than polini or stock, but i wasnt ...

i ran a 95 in my aero with the CMR kit and malossi pipe. was actually running a little rich with the stock air box.

well balls! so being the idiot i am i forgot to order a replacement throttle cable... anyone know where i can procure a replacement cable that will work well with the OKO? or what the correct length would be? cause unless i feel like re doing the cable end and shortening the housing about 3 inches, ...

If i remember correctly the se50 malossi kit is 63-65.

Malossi bbk and malossi wild lion pipe, i figure im going to have to up jet a little for the pipe as well.

ok so im going to try to get the engine back in the aero tomorrow, but being a new carb not really sure where to start. i feel like a 40 pilot and 100-110 main may be in the ball park, but not really sure with this 19mm OKO since i think i may be one of the only people running one on here. since im ...

another related question for those that have put a CT on a SE50 block... how thick of spacer did you make to fill that tiny little gap in between the block and the intake?

I find it funny that maddog hasnt gotten drug into all of this... Both may anger people at times, but they both have good info (some way more than others). Funny that most the people that always want either of them banned always have low post counts... I know bear has given me a ton of info over the...

Greetings: Quoth 86nb50: ...i m happy with 49... If you're getting a true 49 MPH out of 49cc, you should be popping Champagne . but my buddies 50 cc 4 stroke china bike got around me i can t let that happen again I agree with mr wheelman, i pushed my aero 50 to 50 plus and its no easy task. I porte...

Oops... Forgot about brad... I believe were about it though, unless im forgetting somebody else.

Turns out that any one who wants a remote choke with the OKO can use the above kit. Fits perfect, spring is just alot stiffer than the original. Only problem is with the choke cable, there is a little to much excess cable, so it looks like i will be either fabing a 90 degree adjuster to take up the ...

I believe i am the only active board member in KC, there are a few others but only a handfull. Not much love for scooters in this town. Im a pretty busy guy, so not sure what help i can be, but let me know.

ok so i had some time to research a bit, and found that there are quite a few part #s out there for both with international varieties as well. 21395-GAH-000 SA 50 88-97 21395-GN2-000 HONDA NE50 NB50 (euro part) 21395-gc8-010 HONDA SH50 SCOOPY,SA50 (euro part) 21395-GBL-870 Honda SA50 (read straight ...