Search found 27 matches
- Sat Apr 10, 2010 4:51 pm
- Forum: Scooter Showcase
- Topic: streched spree
- Replies: 9
- Views: 5214
Re: streched spree
As for the cables everything reaches fine. Except the rear brake cable, But my cable has been broke for quite some time(like 1500 miles). I have the elite front wheel and brakes so thats all i need it makes things more interesting. O yea the pipe is pretty lond. Lets just say I don't drive around th...
- Fri Apr 09, 2010 3:27 am
- Forum: Scooter Showcase
- Topic: streched spree
- Replies: 9
- Views: 5214
Re: streched spree
I'm still working on the gy6 150 spree swap
- Wed Apr 07, 2010 11:16 pm
- Forum: Scooter Showcase
- Topic: streched spree
- Replies: 9
- Views: 5214
Re: streched spree
yea those pics suck here are some new pics i streched it another 3''.
- Wed Apr 07, 2010 10:58 pm
- Forum: General Discussion
- Topic: 48mm spree BBK and Variator info (taz)
- Replies: 32
- Views: 10298
Re: 48mm spree BBK and Variator info (taz)
I figured out how to get the elite front wheel and brake on the spree.
I'm about to get some pics I'll put them in the "wheel and tire size" thread in the general disscusion
I'm about to get some pics I'll put them in the "wheel and tire size" thread in the general disscusion
- Wed Apr 07, 2010 10:52 pm
- Forum: Performance Technical
- Topic: best engine swap for a spree
- Replies: 8
- Views: 3845
Re: best engine swap for a spree
II'm working on a build right now putting a gy6 150cc on a spree. Can anyone say 90mph.
- Tue Apr 06, 2010 11:49 pm
- Forum: General Discussion
- Topic: Rims and sizes
- Replies: 25
- Views: 13714
Re: Rims and sizes
ok so I was given a 87 elite parts bike and I decided to try out the elite front wheel and brake assembely on my spree. So to get it all to mount up properly you must cut just over 1/4 inch off the elite hub to get it down to the width of the spree hub. Then you use the spree wheel spacer plus 1/4 i...
- Thu Mar 25, 2010 2:50 pm
- Forum: Scooter Showcase
- Topic: streched spree
- Replies: 9
- Views: 5214
streched spree
So me and my buddy were sitting around bored last night and we decided to wrench on the spree. So I removed the motor and motor mount. I took the motor mount and extended it 2.5'' and shave some of the frame so I would all fit together. Everything bolted right up no problems. The bike sits an inch o...
- Tue Mar 23, 2010 10:41 pm
- Forum: Performance Technical
- Topic: 1985 Honda Spree NQ50
- Replies: 12
- Views: 5078
Re: 1985 Honda Spree NQ50
I'm running a ruckus shock on my spree with 3''x10'' tires. You have to move your shock mount point to under the oil tank. But I did it with no welding. I also just streched the spree by making the motor mount a little longer and bolting it to were the center stand would mount. (with 3'' tires the c...
- Tue Mar 16, 2010 12:02 am
- Forum: Technical Help
- Topic: I think I need a clutch
- Replies: 2
- Views: 1668
Re: I think I need a clutch
I think i need an impact wrench cause I cant get the clutch or rear wheel off
- Mon Mar 15, 2010 10:09 pm
- Forum: Technical Help
- Topic: I think I need a clutch
- Replies: 2
- Views: 1668
I think I need a clutch
So I need some help. I was ridding my spree today and came to a stop sign and my bike died. So I try to restart it and the starter propelled my bike forward and it ran fine until I stoped and it died again. So I pulled apart the side cover and removed the belt. The clutch will not disengage at all. ...
- Thu Mar 11, 2010 10:14 am
- Forum: Performance Technical
- Topic: expansion chamber mods
- Replies: 13
- Views: 3669
Re: expansion chamber mods
hey ae86guy what kind of clutch springs are you using?
I'm running pretty much the same setup on my spree but with a pully mod and wider belt. It hits 44mph but bottom end sucks. I need new clutch springs.
I'm running pretty much the same setup on my spree but with a pully mod and wider belt. It hits 44mph but bottom end sucks. I need new clutch springs.
- Thu Mar 11, 2010 9:34 am
- Forum: Technical Help
- Topic: spree kickstand
- Replies: 6
- Views: 2453
Re: spree kickstand
I had the same problem when I put 3.00'' tires on the spree.
I just removed the center stand and used a aluminum bike side stand and it works great
I just removed the center stand and used a aluminum bike side stand and it works great
- Wed Feb 24, 2010 1:20 pm
- Forum: Technical Help
- Topic: 3.0 X10 Tires on Spree. Will this work?
- Replies: 7
- Views: 3374
Re: 3.0 X10 Tires on Spree. Will this work?
You may need to trim you rear fender some I did on my spree when I went to the 3.0'' tire
- Mon Feb 15, 2010 2:56 pm
- Forum: Performance Technical
- Topic: Pocket bike tuned pipe build
- Replies: 16
- Views: 9235
Re: Pocket bike tuned pipe build
I have honda ruckus rear shock with the mounting point moved up by the oil tank.
I didn't have to but I rides way nicer
I didn't have to but I rides way nicer
- Mon Feb 15, 2010 1:56 pm
- Forum: Performance Technical
- Topic: Pocket bike tuned pipe build
- Replies: 16
- Views: 9235
Re: Pocket bike tuned pipe build
Ok I built one, It's not real pretty but it only cost about $15 for the parts.
It helps mid range to top end alot
It helps mid range to top end alot