Jerry,
At 5300 ft, shouldn't he be playing with his mix off stock levels?
What do your plugs look like, light brown, dark brown, or white?
Search found 4326 matches
- Sun Oct 24, 2004 9:22 pm
- Forum: Technical Help
- Topic: Fouling plug?
- Replies: 7
- Views: 5908
- Sun Oct 24, 2004 9:20 pm
- Forum: General Discussion
- Topic: Fixing up an 86
- Replies: 3
- Views: 3227
Jerry, Does aircraft stripper work on plastic? I know it does on aluminum. I hate strippers. You never get all of it off, and it eat the new paintjob. Rattlecan paint is pretty soft; I'd plan on sanding the whole thing down with 400 grit wet dry, with water, to remove it. Follow with 600 grit. Then ...
- Sat Oct 23, 2004 12:47 pm
- Forum: Technical Help
- Topic: MOPEDS WEAK AGAIN AHH!!
- Replies: 10
- Views: 6827
- Fri Oct 22, 2004 2:36 pm
- Forum: Technical Help
- Topic: MOPEDS WEAK AGAIN AHH!!
- Replies: 10
- Views: 6827
- Fri Oct 22, 2004 10:47 am
- Forum: General Discussion
- Topic: snow
- Replies: 5
- Views: 4099
- Fri Oct 22, 2004 10:45 am
- Forum: Technical Help
- Topic: tranny oil
- Replies: 2
- Views: 2733
- Fri Oct 22, 2004 10:44 am
- Forum: Technical Help
- Topic: carb
- Replies: 3
- Views: 3496
- Fri Oct 22, 2004 10:43 am
- Forum: Technical Help
- Topic: MOPEDS WEAK AGAIN AHH!!
- Replies: 10
- Views: 6827
- Fri Oct 22, 2004 10:41 am
- Forum: Performance Technical
- Topic: new idea
- Replies: 19
- Views: 10262
I'm still playing with the Iowa. I bought another intake runner (carb to reed valve) to re-port that part. If you look on the side that the carb attaches to, the inlet jumps down from the 17mm dia to a much smaller throat. In my mind, you want a nice, even expansion of the inlet after the carb's cho...
- Thu Oct 21, 2004 3:47 pm
- Forum: Performance Technical
- Topic: new idea
- Replies: 19
- Views: 10262
- Thu Oct 21, 2004 11:03 am
- Forum: Performance Technical
- Topic: new idea
- Replies: 19
- Views: 10262
- Thu Oct 21, 2004 10:55 am
- Forum: General Discussion
- Topic: snow
- Replies: 5
- Views: 4099
- Mon Oct 18, 2004 8:22 pm
- Forum: Technical Help
- Topic: No Power.....can't figure out....please help!
- Replies: 21
- Views: 11491
Just b/c the engine will ying up on the stand doesn't mean it will do it under load. For some reason you're not getting generating any torque. For the clutch to be out the engine should be screaming, and the scooter not moving. Either way you'll have a good part soon to check. Why is your clutch oil...
- Mon Oct 18, 2004 3:59 pm
- Forum: Technical Help
- Topic: How to prime the oil pump
- Replies: 9
- Views: 10634
- Mon Oct 18, 2004 11:33 am
- Forum: Technical Help
- Topic: oil
- Replies: 8
- Views: 6590
... is oil dribbling out the outlet hose, or out the bottom of the pump? If oil is dribbling out of the bottom of the pump, at the gear input, that would be filling your lower chamber with oil, which would then get pumped up top. That would also explain why it's cranking hard; the piston is trying t...